TLK110 Datasheet, PDF (77/104 Pages) Texas Instruments – Industrial Temp, Single Port 10/100Mbs Ethernet Physical Layer

TLK110
www.ti.com
SLLS901A – DECEMBER 2011 – REVISED FEBRUARY 2012
Table 8-44. Cable Diagnostic Amplitude Results Register 3 (CDARR3), address 0x0187 (continued)
BIT NAME
7 RESERVED
6:0 TPTD Peak
Amplitude 5
DEFAULT
0,RO
<000 0000>,RO
FUNCTION
RESERVED: Writes ignored, read as 0.
Amplitude of the Fifth peak discovered by the TDR mechanism on Transmit Channel (TPTD).
The value of these bits is translated into type of cable fault and/or interference.
This amplitude value refers to peak location stored in bits [7:0] in register CDLRR3 (0x182)
Copyright © 2011–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TLK110
Register Block
77