LM3S6G11 Datasheet, PDF (752/827 Pages) Texas Instruments – Stellaris® LM3S6G11 Microcontroller

Signal Tables
OBSOLETE: TI has discontinued production of this device.
Table 18-7. Signals by Pin Number (continued)
Pin Number
Pin Name
Pin Type Buffer Type^a Description
PB4
I/O
TTL
GPIO port B bit 4.
C0-
I
Analog Analog comparator 0 negative input.
A6
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
PB6
I/O
TTL
GPIO port B bit 6.
C0+
I
Analog Analog comparator 0 positive input.
C0o
O
TTL
Analog comparator 0 output.
A7
CCP1
I/O
TTL
Capture/Compare/PWM 1.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
CCP7
I/O
TTL
Capture/Compare/PWM 7.
PB7
I/O
TTL
GPIO port B bit 7.
A8
NMI
I
TTL
Non-maskable interrupt.
PC0
I/O
TTL
GPIO port C bit 0.
A9
SWCLK
I
TTL
JTAG/SWD CLK.
TCK
I
TTL
JTAG/SWD CLK.
PC3
I/O
TTL
GPIO port C bit 3.
A10
SWO
O
TTL
JTAG TDO and SWO.
TDO
O
TTL
JTAG TDO and SWO.
PE0
I/O
TTL
GPIO port E bit 0.
A11
CCP3
I/O
TTL
Capture/Compare/PWM 3.
SSI1Clk
I/O
TTL
SSI module 1 clock
PE3
I/O
TTL
GPIO port E bit 3.
CCP1
A12
CCP7
I/O
TTL
Capture/Compare/PWM 1.
I/O
TTL
Capture/Compare/PWM 7.
SSI1Tx
O
TTL
SSI module 1 transmit
B1
PE7
I/O
TTL
GPIO port E bit 7.
PE4
I/O
TTL
GPIO port E bit 4.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
B2
CCP3
I/O
TTL
Capture/Compare/PWM 3.
U2Tx
O
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
PE5
I/O
TTL
GPIO port E bit 5.
B3
CCP5
I/O
TTL
Capture/Compare/PWM 5.
PD5
I/O
TTL
GPIO port D bit 5.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
B4
CCP4
I/O
TTL
Capture/Compare/PWM 4.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
GNDA
B5
-
Power The ground reference for the analog circuits ( Analog Comparators,
etc.). These are separated from GND to minimize the electrical
noise contained on VDD from affecting the analog functions.
752
July 24, 2012
Texas Instruments-Production Data