LM3S6611 Datasheet, PDF (581/647 Pages) List of Unclassifed Manufacturers – Microcontroller

Stellaris^® LM3S6611 Microcontroller
Table 17-5. Signals by Pin Number (continued)
Pin Number
Pin Name
Pin Type Buffer Type^a Description
PA1
I/O
TTL
GPIO port A bit 1.
M3
U0Tx
O
TTL
UART module 0 transmit. When in IrDA mode, this signal has IrDA
modulation.
PA2
I/O
TTL
GPIO port A bit 2.
M4
SSI0Clk
I/O
TTL
SSI module 0 clock.
PA5
I/O
TTL
GPIO port A bit 5.
M5
SSI0Tx
O
TTL
SSI module 0 transmit.
PA7
I/O
TTL
GPIO port A bit 7.
M6
I2C1SDA
I/O
OD
I²C module 1 data.
M7
RXIP
I
Analog RXIP of the Ethernet PHY.
M8
TXOP
O
Analog TXOP of the Ethernet PHY.
M9
PF0
I/O
TTL
GPIO port F bit 0.
M10
WAKE
I
TTL
An external input that brings the processor out of Hibernate mode
when asserted.
M11
OSC1
O
Analog Main oscillator crystal output. Leave unconnected when using a
single-ended clock source.
M12
HIB
O
OD
An open-drain output with internal pull-up that indicates the
processor is in Hibernate mode.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
17.2.2 Signals by Signal Name
Table 17-6. Signals by Signal Name
Pin Name
C0+
C0-
C0o
C1+
C1-
C1o
CCP0
CCP1
CCP2
CCP3
CCP4
CCP5
CMOD0
Pin Number
A7
A6
M1
M1
B7
C2
E12
F1
D12
M2
L2
L1
E11
Pin Type
I
I
O
I
I
O
I/O
I/O
I/O
I/O
I/O
I/O
I
CMOD1
B10
I
ERBIAS
K3
I
Buffer Type^a Description
Analog Analog comparator 0 positive input.
Analog Analog comparator 0 negative input.
TTL
Analog comparator 0 output.
Analog Analog comparator 1 positive input.
Analog Analog comparator 1 negative input.
TTL
Analog comparator 1 output.
TTL
Capture/Compare/PWM 0.
TTL
Capture/Compare/PWM 1.
TTL
Capture/Compare/PWM 2.
TTL
Capture/Compare/PWM 3.
TTL
Capture/Compare/PWM 4.
TTL
Capture/Compare/PWM 5.
TTL
CPU Mode bit 0. Input must be set to logic 0 (grounded); other
encodings reserved.
TTL
CPU Mode bit 1. Input must be set to logic 0 (grounded); other
encodings reserved.
Analog
12.4-kΩ resistor (1% precision) used internally for Ethernet
PHY.
July 16, 2014
581
Texas Instruments-Production Data