English
Language : 

LM3S6100 Datasheet, PDF (496/559 Pages) Texas Instruments – Stellaris® LM3S6100 Microcontroller
Signal Tables
Table 15-2. Signals by Signal Name (continued)
Pin Name
Pin Number Pin Type Buffer Typea Description
VDDA
3
-
Power The positive supply for the analog circuits (ADC, Analog
98
Comparators, etc.). These are separated from VDD to
minimize the electrical noise contained on VDD from affecting
the analog functions. VDDA pins must be supplied with a
voltage that meets the specification in “Recommended DC
Operating Conditions” on page 513, regardless of system
implementation.
XTALNPHY
17
O
TTL
Ethernet PHY XTALN 25-MHz oscillator crystal output.
Connect this pin to ground when using a single-ended 25-MHz
clock input connected to the XTALPPHY pin.
XTALPPHY
16
I
TTL
Ethernet PHY XTALP 25-MHz oscillator crystal input or
external clock reference input.
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
15.1.3 Signals by Function, Except for GPIO
Table 15-3. Signals by Function, Except for GPIO
Function
Pin Name
C0+
Analog Comparators C0-
C0o
ERBIAS
Pin Number
90
92
91
41
Pin Type
I
I
O
I
Ethernet
GNDPHY
42
-
85
86
LED0
59
O
LED1
60
O
MDIO
58
I/O
RXIN
37
I
RXIP
40
I
TXON
46
O
TXOP
43
O
VCCPHY
36
-
83
84
XTALNPHY
17
O
XTALPPHY
16
I
General-Purpose
Timers
CCP0
CCP1
CCP2
CCP3
66
I/O
34
I/O
67
I/O
23
I/O
Buffer Typea
Description
Analog Analog comparator 0 positive input.
Analog Analog comparator 0 negative input.
TTL
Analog comparator 0 output.
Analog
12.4-kΩ resistor (1% precision) used internally for
Ethernet PHY.
Power GND of the Ethernet PHY.
TTL
TTL
TTL
Analog
Analog
Analog
Analog
Power
Ethernet LED 0.
Ethernet LED 1.
MDIO of the Ethernet PHY.
RXIN of the Ethernet PHY.
RXIP of the Ethernet PHY.
TXON of the Ethernet PHY.
TXOP of the Ethernet PHY.
VCC of the Ethernet PHY.
TTL
Ethernet PHY XTALN 25-MHz oscillator crystal
output. Connect this pin to ground when using a
single-ended 25-MHz clock input connected to the
XTALPPHY pin.
TTL
Ethernet PHY XTALP 25-MHz oscillator crystal
input or external clock reference input.
TTL
Capture/Compare/PWM 0.
TTL
Capture/Compare/PWM 1.
TTL
Capture/Compare/PWM 2.
TTL
Capture/Compare/PWM 3.
496
June 18, 2012
Texas Instruments-Production Data