LM3S6100 Datasheet, PDF (435/559 Pages) Texas Instruments – Stellaris® LM3S6100 Microcontroller

Stellaris^® LM3S6100 Microcontroller
12.4
12.4.1
■ A frame transmission error has occurred
■ A frame has been transmitted successfully
■ A frame has been received with inadequate room in the RX FIFO (overrun)
■ A frame has been received with one or more error conditions (for example, FCS failed)
■ An MII management transaction between the MAC and PHY layers has completed
■ One or more of the following PHY layer conditions occurs:
– Auto-Negotiate Complete
– Remote Fault
– Link Status Change
– Link Partner Acknowledge
– Parallel Detect Fault
– Page Received
– Receive Error
– Jabber Event Detected
Initialization and Configuration
The following sections describe the hardware and software configuration required to set up the
Ethernet Controller.
Hardware Configuration
Figure 12-4 on page 436 shows the proper method for interfacing the Ethernet Controller to a
10/100BASE-T Ethernet jack.
June 18, 2012
435
Texas Instruments-Production Data