LM3S6100 Datasheet, PDF (470/559 Pages) Texas Instruments – Stellaris® LM3S6100 Microcontroller

Ethernet Controller
Bit/Field
6
5
4
3
2
1
0
Name
RXER_INT
Type
RC
PRX_INT
RC
PDF_INT
RC
LPACK_INT
RC
LSCHG_INT
RC
RFAULT_INT
RC
ANEGCOMP_INT
RC
Reset
0
0
0
0
0
0
0
Description
Receive Error Interrupt
When set, this bit indicates that a receive error has been detected by
the Ethernet Controller.
Page Receive Interrupt
When set, this bit indicates that a new page has been received from the
link partner during auto-negotiation.
Parallel Detection Fault Interrupt
When set, this bit indicates that a parallel detection fault has been
detected by the Ethernet Controller during the auto-negotiation process.
LP Acknowledge Interrupt
When set, this bit indicates that an FLP burst has been received with
the ACK bit set in the MR5 register during auto-negotiation.
Link Status Change Interrupt
When set, this bit indicates that the link status has changed from OK to
FAIL.
Remote Fault Interrupt
When set, this bit indicates that a remote fault condition has been
signaled by the link partner.
Auto-Negotiation Complete Interrupt
When set, this bit indicates that the auto-negotiation sequence has
completed successfully.
470
June 18, 2012
Texas Instruments-Production Data