|
LM3S3749 Datasheet, PDF (45/898 Pages) Texas Instruments – Stellaris® LM3S3749 Microcontroller | |||
|
◁ |
Stellaris® LM3S3749 Microcontroller
â Programmable data frame size from 4 to 16 bits
â Internal loopback test mode for diagnostic/debug testing
â I2C
â Two I2C modules, each with the following features:
â Devices on the I2C bus can be designated as either a master or a slave
⢠Supports both sending and receiving data as either a master or a slave
⢠Supports simultaneous master and slave operation
â Four I2C modes
⢠Master transmit
⢠Master receive
⢠Slave transmit
⢠Slave receive
â Two transmission speeds: Standard (100 Kbps) and Fast (400 Kbps)
â Master and slave interrupt generation
⢠Master generates interrupts when a transmit or receive operation completes (or aborts
due to an error)
⢠Slave generates interrupts when data has been sent or requested by a master
â Master with arbitration and clock synchronization, multimaster support, and 7-bit addressing
mode
â USB
â Standards-based
â USB 2.0 full-speed (12 Mbps) and low-speed (1.5 Mbps) operation
â USB Device or Host mode
â Integrated PHY
â 4 transfer types: Control, Interrupt, Bulk, and Isochronous
â 8 endpoints
⢠1 dedicated control IN endpoint and 1 dedicated control OUT endpoint
⢠3 configurable IN endpoints and 3 configurable OUT endpoints
â 2 KB dedicated endpoint memory
⢠Direct memory access (DMA)
November 17, 2011
45
Texas Instruments-Production Data
|
▷ |