LMK00306_16 Datasheet, PDF (10/39 Pages) Texas Instruments – 3-GHz 6-Output Ultra-Low Additive Jitter Differential Clock Buffer/Level Translator

LMK00306
SNAS578D – FEBRUARY 2012 – REVISED MARCH 2016
www.ti.com
Electrical Characteristics (continued)
Unless otherwise specified: Vcc = 3.3 V ± 5%, Vcco = 3.3 V ± 5%, 2.5 V ± 5%, -40 °C ≤ T_A ≤ 85 °C, CLKin driven
differentially, input slew rate ≥ 3 V/ns. Typical values represent most likely parametric norms at Vcc = 3.3 V, Vcco = 3.3 V, T_A
= 25 °C, and at the Recommended Operation Conditions at the time of product characterization and are not ensured. ⁽¹⁾⁽²⁾
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
t_R
Output Rise Time
20% to 80%⁽⁷⁾
R_T = 160 Ω to GND, Uniform transmission line up
to 10 in. with 50-Ω characteristic impedance,
t_F
Output Fall Time
80% to 20%⁽⁷⁾
R_L = 100 Ω differential,C_L ≤ 5 pF
175
300 ps
175
300 ps
LVDS OUTPUTS (CLKoutAn/CLKoutAn*, CLKoutBn/CLKoutBn*)
f_{CLKout_FS}
f_{CLKout_RS}
Maximum Output
Frequency
Full V_OD Swing^(5)(10)
Maximum Output
Frequency
Reduced V_OD
Swing^{(5) (10)}
V_OD ≥ 250 mV,
R_L = 100 Ω differential
V_OD ≥ 200 mV,
R_L = 100 Ω differential
1.0
1.6
1.5
2.1
GHz
GHz
Jitter_ADD
Additive RMS Jitter,
Integration Bandwidth
10 kHz to 20
MHz ^{(5) (11) (12)}
R_L = 100 Ω differential
CLKin: 100 MHz,
Slew rate ≥ 3 V/ns
CLKin: 156.25 MHz,
Slew rate ≥ 3 V/ns
94
115
fs
70
90
Jitter_ADD
Additive RMS Jitter
Integration Bandwidth
1 MHz to 20 MHz⁽¹¹⁾
Vcco = 3.3 V,
R_L = 100 Ω differential
CLKin: 100 MHz,
Slew rate ≥ 3 V/ns
CLKin: 156.25 MHz,
Slew rate ≥ 2.7 V/ns
CLKin: 625 MHz,
Slew rate ≥ 3 V/ns
89
77
fs
37
CLKin: 100 MHz,
Slew rate ≥ 3 V/ns
-159.5
Noise Floor
DUTY
V_OD
ΔV_OD
V_OS
ΔV_OS
Noise Floor
f_OFFSET ≥ 10 MHz^{(14) (15)}
Duty Cycle⁽⁵⁾
Output Voltage Swing⁽⁶⁾
Change in Magnitude of
V_OD for Complementary
Output States
Output Offset Voltage
Change in Magnitude of
V_OS for Complementary
Output States
Vcco = 3.3 V,
R_L = 100 Ω differential
CLKin: 156.25 MHz,
Slew rate ≥ 2.7 V/ns
CLKin: 625 MHz,
Slew rate ≥ 3 V/ns
50% input clock duty cycle
T_A = 25 °C, DC Measurement,
R_L = 100 Ω differential
-157.0
45%
250
-152.7
400
-50
1.125
1.25
-35
dBc/Hz
55%
450 mV
50 mV
1.375 V
35 mV
I_SA
Output Short Circuit
T_A = 25 °C,
I_SB
Current Single Ended Single ended outputs shorted to GND
I_SAB
Output Short Circuit
Current Differential
Complementary outputs tied together
-24
24 mA
-12
12 mA
t_R
Output Rise Time
20% to 80%⁽⁷⁾
Uniform transmission line up to 10 inches with 50-
t_F
Output Fall Time
80% to 20%⁽⁷⁾
Ω characteristic impedance, R_L = 100 Ω differential,
C_L ≤ 5 pF
175
300 ps
175
300 ps
10
Submit Documentation Feedback
Product Folder Links: LMK00306
Copyright © 2012–2016, Texas Instruments Incorporated