GC5018 Datasheet, PDF (87/115 Pages) Texas Instruments – 8-CHANNEL WIDEBAND RECEIVER

www.ti.com
BIT 7
clip_lo_timer_3(7:0)
0
0
0
0
0
clip_lo_timer_3(15:0) : The clip low timer value in samples.
4.4.4.55 RAGC3_CLIP_SAMPLES Register
GC5018
8-CHANNEL WIDEBAND RECEIVER
SLWS169 – MAY 2005
BIT 0
0
0
0
Register name: RAGC3_CLIP_SAMPLES
BIT 15
0
0
0
BIT 7
0
0
0
Address: 0x36
clip_hi_samples_3(7:0)
0
0
0
clip_lo_samples_3(7:0)
0
0
0
BIT 8
0
0
BIT 0
0
0
clip_hi_samples_3(7:0) : Number of samples above the high threshold within the clip high time to enable
a clip event.
clip_lo_samples_3(7:0) : Number of samples below the low threshold within the clip low time to disable a
clip event.
4.4.4.56 RAGC3_CLIP_ERROR Register
Register name: RAGC3_CLIP_ERROR
BIT 15
0
0
0
BIT 7
0
0
0
Address: 0x37
clip_error_3(15:8)
0
0
0
clip_error_3(7:0)
0
0
0
BIT 8
0
0
BIT 0
0
0
clip_error_3(15:0) : Error value that is added into the loop accumulator when a clip is detected.
4.4.4.57 RAGC0_ACCUM_LSB Register
Register name: RAGC0_ACCUM_LSB
BIT 15
0
0
0
BIT 7
0
0
0
Address: 0x38
ragc0_accum(15:8)
0
0
0
ragc0_accum (7:0)
0
0
0
ragc0_accum(15:0) : lower 16 bits of the ragc0 error accumulator.
READ ONLY
0
0
BIT 8
0
BIT 0
0
GC5018 GENERAL CONTROL
87