GC5018 Datasheet, PDF (113/115 Pages) Texas Instruments – 8-CHANNEL WIDEBAND RECEIVER

www.ti.com
GC5018
8-CHANNEL WIDEBAND RECEIVER
SLWS169 – MAY 2005
–40°C to 85°C case supplies across recommended range (unless otherwise noted)
t_EWCSU
t_CHD
t_CSPW
t_CDLY
t_REC
t_HIZ
t_COH
I_CDYN
PARAMETER
Control setup during writes
3 pin mode: d[15:0] valid before wr_n and ce_n rising edge
2 pin mode: d[15:0] valid before ce_n rising edge ⁽¹⁾
Control hold during writes.
3 pin mode: a[5:0] and d[15:0] valid after wr_n and ce_n rise
2 pin mode: a[5:0], d[15:0] and wr_n valid after ce_n rise ⁽¹⁾
Control strobe (ce_n and wr_n low) pulse width during write. ⁽¹⁾
Control output delay ce_n and rd_n low and a[5:0] stable to d[15:0] during read. ⁽¹⁾
Control recovery time between reads or writes. ⁽¹⁾
Control end of read to Hi-Z. rd_n and ce_n rise to d[15:0] 3-state ⁽¹⁾
Control read d[15:0] output hold time⁽¹⁾
Core dynamic supply current ,nominal voltages, 160 MHz, (specific conditions, typical app with chip busy
within capability of the tester, high temperature.)⁽¹⁾
MIN MAX UNIT
10
ns
6
ns
15
ns
25 ns
6 ns
10 ns
3
ns
1700 mA
SPECIFICATIONS 113