GC5018 Datasheet, PDF (78/115 Pages) Texas Instruments – 8-CHANNEL WIDEBAND RECEIVER

GC5018
8-CHANNEL WIDEBAND RECEIVER
SLWS169 – MAY 2005
www.ti.com
sd_timer_1(7:0)
0
0
0
0
0
0
0
0
sd_timer_1(15:0) : After the first no signal sample occurs, this is the amount of samples that control the
length of time to determine the loss of signal condition.
4.4.4.24 RAGC1_SD_SAMPLES Register
Register name: RAGC1_SD_SAMPLES
BIT 15
0
0
0
BIT 7
0
0
0
Address: 0x17
sd_samples_1(15:8)
0
0
0
sd_samples_1(7:0)
0
0
0
BIT 8
0
0
BIT 0
0
0
sd_samples_1(15:0) : Number of samples that must be below the sd_thresh_X threshold within the
sd_timer_X timer value for the loss of signal condition to occur.
4.4.4.25 RAGC1_CLIP_HITHRESH Register
Register name: RAGC1_CLIP_HITHRESH
BIT 15
0
0
0
BIT 7
0
0
0
Address: 0x18
clip_hi_thresh_1(15:8)
0
0
0
clip_hi_thresh_1(7:0)
0
0
0
clip_hi_thresh_1(15:0) : The high threshold value for clip detection.
4.4.4.26 RAGC1_CLIP_LOTHRESH Register
BIT 8
0
0
BIT 0
0
0
Register name: RAGC1_CLIP_LOTHRESH
BIT 15
0
0
0
BIT 7
0
0
0
Address: 0x19
clip_lo_thresh_1(15:8)
0
0
0
clip_lo_thresh_1(7:0)
0
0
0
clip_lo_thresh_1(15:0) The low threshold value for clip detection.
4.4.4.27 RAGC1_CLIP_HITIMER Register
BIT 8
0
0
BIT 0
0
0
78
GC5018 GENERAL CONTROL