SMJ626162 Datasheet, PDF (13/42 Pages) Texas Instruments – 524288 BY 16-BIT BY 2-BANK SYNCHRONOUS DYNAMIC RANDOM-ACCESS MEMORY

SMJ626162
524288 BY 16-BIT BY 2-BANK
SYNCHRONOUS DYNAMIC RANDOM-ACCESS MEMORY
SGMS737C – JULY 1997 – REVISED MARCH 1999
power up
Device initialization should be performed after a power up to the full V_CC level; however, after power is
established, a 200-µs interval is required (with no inputs other than CLK). After this interval, both banks of the
device must be deactivated. Eight REFR commands must be performed and the mode register must be set to
complete the device initialization.
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443
13