HD6473887 Datasheet, PDF (292/523 Pages) Renesas Technology Corp – Hitachi Single-Chip Microcomputer

Bits 1 and 0: Clock select 1, 0 (CKS1, CKS0)
Bits 1 and 0 choose ø/64, ø/16, ø/2, or ø as the clock source for the baud rate generator.
For the relation between the clock source, bit rate register setting, and baud rate, see 8, Bit rate
register (BRR).
Bit 1
CKS1
Bit 0
CKS0
Description
0
0
ø clock
(initial value)
0
1
ø_W/2 clock*¹/ø_W clock*²
1
0
ø/16 clock
1
1
ø/64 clock
Notes: 1. ø_W/2 clock is selected in active (medium- and high-speed) or sleep (medium- and high-
speed) mode.
2. ø_W clock is selected in subactive or subsleep mode. SCI3 can be used only when the
ø_W/2 is selected as the CPU clock in subactive or subsleep mode.
6. Serial control register 3 (SCR3)
Bit
7
6
5
TIE
RIE
TE
Initial value
0
0
0
Read/Write
R/W
R/W R/W
4
3
2
1
0
RE MPIE TEIE CKE1 CKE0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
SCR3 is an 8-bit register for selecting transmit or receive operation, the asynchronous mode clock
output, interrupt request enabling or disabling, and the transmit/receive clock source.
SCR3 can be read or written by the CPU at any time.
SCR3 is initialized to H'00 upon reset, and in standby, watch or module standby mode.
275