English
Language : 

RX71M_15 Datasheet, PDF (207/228 Pages) Renesas Technology Corp – Renesas MCUs
RX71M Group
5. Electrical Characteristics
Table 5.47 12-Bit A/D (Unit 1) Conversion Characteristics
Conditions: VCC = AVCC0 = AVCC1 = VCC_USB = VBATT = 2.7 to 3.6 V, 2.7 ≤ VREFH0 ≤ AVCC0,
VCC_USBA = AVCC_USBA = 3.0 to 3.6 V,
VSS = AVSS0 = AVSS1 = VREFL0 = VSS_USB = VSS1_USBA = VSS2_USBA = PVSS_USBA = AVSS_USBA = 0 V,
PCLKB = PCLKD = 1 MHz to 60 MHz, Ta = Topr
Item
Min.
Typ.
Resolution
8
—
Conversion time*1
Permissible signal source
0.88
—
(Operation at PCLK = impedance (max.) = 1.0 kΩ (0.667)
60 MHz)
*2
Analog input capacitance
—
—
Offset error
—
±2.0
Full-scale error
—
±2.0
Quantization error
—
±0.5
Absolute accuracy
—
±4.0
DNL differential nonlinearity error
—
±1.5
INL integral nonlinearity error
—
±2.0
Max.
12
—
30
±3.5
±3.5
—
±6.0
±2.5
±3.5
Unit
Test Conditions
Bit
μs
Sampling in 40 states
pF
LSB
LSB
LSB
LSB
LSB
LSB
Note:
Note 1.
Note 2.
The above specification values apply when there is no access to the external bus during A/D conversion. If access proceeds
during A/D conversion, values may not fall within the above ranges.
The conversion time includes the sampling time and the comparison time. As the test conditions, the number of sampling states
is indicated.
The value in parentheses indicates the sampling time.
Table 5.48 A/D Internal Reference Voltage Characteristics
Conditions: VCC = AVCC0 = AVCC1 = VCC_USB = VBATT = 2.7 to 3.6 V, 2.7 ≤ VREFH0 ≤ AVCC0,
VCC_USBA = AVCC_USBA = 3.0 to 3.6 V,
VSS = AVSS0 = AVSS1 = VREFL0 = VSS_USB = VSS1_USBA = VSS2_USBA = PVSS_USBA = AVSS_USBA = 0 V,
PCLKB = PCLKD = 60 MHz, Ta = Topr
Item
A/D internal reference voltage
Min.
Typ.
Max.
Unit
Test
Conditions
1.20
1.25
1.30
V
R01DS0249EJ0100 Rev.1.00
Jan 15, 2015
Page 207 of 228