RX71M_15 Datasheet, PDF (144/228 Pages) Renesas Technology Corp – Renesas MCUs

RX71M Group
5. Electrical Characteristics
which writing proceed) or data flash memory during program execution in the code flash memory.
Note 6. The low power consumption function is disabled and DEEPCUT[1:0] = 01b.
Note 7. The low power consumption function is enabled and DEEPCUT[1:0] = 11b.
Table 5.5 DC Characteristics (4)
Conditions: VCC = AVCC0 = AVCC1 = VREFH0 = VCC_USB = 2.7 to 3.6 V, 2.7 ≤ VREFH0 ≤ AVCC0,
VCC_USBA = AVCC_USBA = 3.0 to 3.6 V,
VSS = AVSS0 = AVSS1 = VREFL0 = VSS_USB = VSS1_USBA = VSS2_USBA = PVSS_USBA = AVSS_USBA = 0 V,
T_a = T_opr
Item
Symbol Min.
Analog power During 12-bit A/D conversion (unit 0)
AI_CC
—
supply current*¹ _{During 12-bit A/D conversion (unit 0) with the}
—
channel-dedicated sample-and-hold circuits
for 3 channels operating
During 12-bit A/D conversion (unit 1)
—
During 12-bit A/D conversion (unit 1) with the
—
temperature sensor operating
During D/A conversion Without AMP output
—
(per unit)
With AMP output
—
Waiting for A/D, D/A, or temperature sensor
—
conversion (all units)
A/D, D/A converter, temperature sensor in
—
standby mode (all units)
Reference
During 12-bit A/D conversion (unit 0)
AI_REFH
—
power supply
current
Waiting for 12-bit A/D conversion (unit 0)
—
12-bit A/D converter in standby mode (unit 0)
—
USB operating Low speed
current
USBb
USBA
I_CCUSBLS
—
—
USBA
—
Full speed
USBb
USBA
I_CCUSBFS
—
—
USBA
—
High speed
USBA
Standby mode
(direct power down)
RAM standby voltage
VCC rising gradient
VCC falling gradient*²
USBA
I_CCUSBHS
—
I_CCUSBSBY —
V_RAM
2.7
SrVCC 8.4
SfVCC 8.4
Typ. Max. Unit
Test Conditions
0.7 1.1 mA IAVCC0_AD
2.2 3.3 mA IAVCC0_AD+SH
0.7 1.1 mA IAVCC1_AD
0.7 2.3 mA IAVCC1_AD+TEMP
0.24 0.4
0.45 0.7
0.9 1.6
mA IAVCC1_DA
mA
mA IAVCC0 + IAVCC1
1.3 5.0 μA IAVCC0 + IAVCC1
70 120
0.07 0.5
0.07 0.5
μA IVREFH0
μA IVREFH0
μA IVREFH0
3.5 6.5 mA VCC_USB
10.5 13.5
mA VCC_USBA =
AVCC_USBA
(PHYSET.HSEB = 0)
2.8 3.6 mA VCC_USBA =
AVCC_USBA
(PHYSET.HSEB = 1)
4.0 10.0 mA VCC_USB
14.0 22.0
mA VCC_USBA =
AVCC_USBA
(PHYSET.HSEB = 0)
6.5 13.0 mA VCC_USBA =
AVCC_USBA
(PHYSET.HSEB = 1)
50.0 65.0
mA VCC_USBA =
AVCC_USBA
0.1 3.0 μA VCC_USBA =
AVCC_USBA
—
—
V
— 20000 μs/V
—
— μs/V
Note 1. The reference power supply current is included in the power supply current value for 12-bit A/D conversion (unit 1) and D/A
conversion.
Note 2. This applies when V_BATT is used.
R01DS0249EJ0100 Rev.1.00
Jan 15, 2015
Page 144 of 228