RX71M_15 Datasheet, PDF (140/228 Pages) Renesas Technology Corp – Renesas MCUs

RX71M Group
5. Electrical Characteristics
5.1 Absolute Maximum Ratings
5. Electrical Characteristics
Table 5.1 Absolute Maximum Rating
Conditions: VSS = AVSS0 = AVSS1 = VREFL0 = VSS_USB = VSS1_USBA = VSS2_USBA = PVSS_USBA = AVSS_USBA = 0 V
Item
Symbol
Value
Unit
Power supply voltage
VCC, VCC_USB
–0.3 to +4.6
V
V_BATT power supply voltage
Input voltage (except for ports for 5 V tolerant*¹)
Input voltage (ports for 5 V tolerant*¹)
V_BATT
V_in
V_in
–0.3 to +4.6
V
–0.3 to VCC + 0.3
V
–0.3 to +5.8
V
Reference power supply voltage
VREFH0
–0.3 to VCC + 0.3
V
Analog power supply voltage
AVCC0, AVCC1*²
–0.3 to +4.6
V
USBA power supply voltage
VCC_USBA*²
–0.3 to +4.6
V
USBA analog power supply voltage
AVCC_USBA*²
–0.3 to +4.6
V
Analog input voltage
V_AN
Operating temperature
T_opr
Operating temperature (high-temperature products)
T_opr
Storage temperature
T_stg
–0.3 to AVCC + 0.3
V
–40 to +85
°C
–40 to +105 (Under planning)
°C
–55 to +125
°C
Caution: Permanent damage to the LSI may result if absolute maximum ratings are exceeded.
Note 1. Ports 07, 11 to 17, 20, 21, 30 to 33, 67, and C0 to C3 are 5 V tolerant.
Note 2. Connect the AVCC0, AVCC1, and VCC_USB pins to VCC, and the AVSS0, AVSS1, and VSS_USB pins to VSS.
When the A/D converter unit 0 is not to be used, connect the VREFH0 pin to VCC and the VREFL0 pin to VSS, respectively. Do
not leave these pins open.
When the USBA is not to be used, connect the VCC_USBA and AVCC_USBA pins to VCC and the VSS1_USBA, VSS2_USBA,
PVSS_USBA, and AVSS_USBA pins to VSS, respectively. Do not leave these pins open.
R01DS0249EJ0100 Rev.1.00
Jan 15, 2015
Page 140 of 228