CLRC663 Datasheet, PDF (36/132 Pages) NXP Semiconductors – Contactless reader IC

NXP Semiconductors
CLRC663
Contactless reader IC
The bit HiAlert is set to logic 1 if maximum water level bytes (as set in register WaterLevel)
or less can be stored in the FIFO-buffer. It is generated according to the following
equation:
HiAlert = FiFoSize – FiFoLength  WaterLevel
(2)
The bit LoAlert is set to logic 1 if water level bytes (as set in register WaterLevel) or less
are actually stored in the FIFO-buffer. It is generated according to the following equation:
LoAlert = FIFOLength  WaterLevel
(3)
CLRC663
Product data sheet
COMPANY PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 3.3 — 3 April 2012
171133
© NXP B.V. 2012. All rights reserved.
36 of 132