CLRC663 Datasheet, PDF (16/132 Pages) NXP Semiconductors – Contactless reader IC

NXP Semiconductors
CLRC663
Contactless reader IC
8.3.5 EPC-UID/UID-OTP functionality
The physical parameters are described in Table 11.
Table 11. Communication overview for EPC/UID
Communication
direction
Signal type
Transfer speed
26.48 kbit/s
Reader to card (send
data from the
CLRC663 to a card)
reader side modulation 10 % to 30 % ASK
bit encoding
RTZ
bit length
37.76 s
Card to reader
(CLRC663 receives
data from a card)
card side modulation
bit length
bit encoding
52.96 kbit/s
single subcarrier load
modulation
18.88 ms
Manchester coding
Data coding and framing according to EPC global 13.56 MHz ISM (industrial, scientific
and medical) Band Class 1 Radio Frequency Identification Tag Interface Specification
(Candidate Recommendation, Version 1.0.0).
8.3.6 ISO/IEC 18000-3 mode 3/ EPC Class-1 HF functionality
The ISO/IEC 18000-3 mode 3/ EPC Class-1 HF is not described in this document. For a
detailed explanation of the protocol, refer to the ISO/IEC 18000-3 mode 3/ EPC Class-1
HF standard.
8.3.7 ISO/IEC 18092 mode
The CLRC663 supports Passive Initiator Communication mode at the transfer speeds
106 kbit/s, 212 kbit/s and 424 kbit/s as defined in the ISO/IEC 18092 standard.
• Passive communication mode means that the target answers to an initiator command
in a load modulation scheme. The initiator is active in terms of generating the RF field.
• Initiator: generates RF field at 13.56 MHz and starts the ISO/IEC 18092
communication.
• Target: responds to initiator command either in a load modulation scheme in Passive
communication mode or using a self generated and self modulated RF field for Active
Communication mode.
CLRC663
Product data sheet
COMPANY PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 3.3 — 3 April 2012
171133
© NXP B.V. 2012. All rights reserved.
16 of 132