|
MC68HC908JK1 Datasheet, PDF (116/210 Pages) Motorola, Inc – MC68HC908JK1 | |||
|
◁ |
Timer Interface Module (TIM)
10.2 Introduction
This section describes the timer interface module (TIM2, Version B). The
TIM is a two-channel timer that provides a timing reference with input
capture, output compare, and pulse-width-modulation functions.
Figure 10-1 is a block diagram of the TIM.
10.3 Features
Features of the TIM include the following:
⢠Two input capture/output compare channels
â Rising-edge, falling-edge, or any-edge input capture trigger
â Set, clear, or toggle output compare action
⢠Buffered and unbuffered pulse width modulation (PWM) signal
generation
⢠Programmable TIM clock input with 7-frequency internal bus clock
prescaler selection
⢠Free-running or modulo up-count operation
⢠Toggle any channel pin on overflow
⢠TIM counter stop and reset bits
⢠Modular architecture expandable to eight channels
10.4 Pin Name Conventions
The TIM share two I/O pins with two port D I/O pins. The full name of the
TIM I/O pins are listed in Table 10-1. The generic pin name appear in the
text that follows.
Table 10-1. Pin Name Conventions
TIM Generic Pin Names:
Full TIM Pin Names:
TCH0
PTD4/TCH0
TCH1
PTD5/TCH1
Technical Data
116
Timer Interface Module (TIM)
MC68H(R)C908JL3 â Rev. 1.0
MOTOROLA
|
▷ |