M37733MHBXXXFP Datasheet, PDF (69/89 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

PRELIMINARY _{NSootimcee: pTahriasmisentroict} ^{alimfinitsalasrpeescuifbicjeactitotno. change.}
MITSUBISHI MICROCOMPUTERS
M37733MHBXXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
TIMING REQUIREMENTS (VCC = 5 V ± 10%, VSS = 0 V, Ta = –20 to 85 °C, f(XIN) = 25 MHz, unless otherwise noted (Note))
Notes 1. This applies when the main clock division selection bit = “0” and f(f2) = 12.5 MHz.
2. Input signal’s rise/fall time must be 100 ns or less, unless otherwise noted.
External clock input
Symbol
Parameter
Limits
Min.
Max.
Unit
tc
External clock input cycle time (Note 3)
40
ns
tw(H)
External clock input high-level pulse width (Note 4)
15
ns
tw(L)
External clock input low-level pulse width (Note 4)
15
ns
tr
External clock rise time
8
ns
tf
External clock fall time
8
ns
Notes 3. When the main clock division selection bit = “1”, the minimum value of tc = 80 ns.
4. When the main clock division selection bit = “1”, values of tw(H) / tc and tw(L) / tc must be set to values from 0.45 through 0.55.
Single-chip mode
Symbol
tsu(P0D–E)
tsu(P1D–E)
tsu(P2D-E)
tsu(P3D–E)
tsu(P4D–E)
tsu(P5D–E)
tsu(P6D–E)
tsu(P7D–E)
tsu(P8D–E)
th(E–P0D)
th(E–P1D)
th(E–P2D)
th(E–P3D)
th(E–P4D)
th(E–P5D)
th(E–P6D)
th(E–P7D)
th(E–P8D)
Port P0 input setup time
Port P1 input setup time
Port P2 input setup time
Port P3 input setup time
Port P4 input setup time
Port P5 input setup time
Port P6 input setup time
Port P7 input setup time
Port P8 input setup time
Port P0 input hold time
Port P1 input hold time
Port P2 input hold time
Port P3 input hold time
Port P4 input hold time
Port P5 input hold time
Port P6 input hold time
Port P7 input hold time
Port P8 input hold time
Parameter
Limits
Min.
Max.
Unit
60
ns
60
ns
60
ns
60
ns
60
ns
60
ns
60
ns
60
ns
60
ns
0
ns
0
ns
0
ns
0
ns
0
ns
0
ns
0
ns
0
ns
0
ns
Memory expansion mode and microprocessor mode
Symbol
tsu(D–E)
tsu(RDY– φ 1)
tsu(HOLD– φ 1)
th(E–D)
th( φ 1–RDY)
th( φ 1–HOLD)
Data input setup time
RDY input setup time
HOLD input setup time
Data input hold time
RDY input hold time
HOLD input hold time
Parameter
Limits
Min.
Max.
Unit
32
ns
55
ns
55
ns
0
ns
0
ns
0
ns
69