M37733MHBXXXFP Datasheet, PDF (23/89 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

PRELIMINARY _{NSootimcee: pTahriasmisentroict} ^{alimfinitsalasrpeescuifbicjeactitotno. change.}
MITSUBISHI MICROCOMPUTERS
M37733MHBXXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Data write is performed in the same way as for the timer mode. When
data is written in timer Ai halted, it is also written to the reload register
and the counter.
When data is written to timer Ai which is busy, the data is written to
the reload register, but not to the counter. The counter is reloaded
with new data from the reload register at the next reload time and
continues counting.
Undefined data is read when timer Ai is read.
7 654 3 210
One-shot start flag
Address
4216
Timer A0 one-shot start flag
Timer A1 one-shot start flag
Timer A2 one-shot start flag
Timer A3 one-shot start flag
Timer A4 one-shot start flag
Fig. 23 One-shot start flag bit configuration
Selected
clock source fi
TAiIN
(rising edge is
selected)
TAiOUT
In this case, the contents of the reload register is 000316.
Fig. 24 Pulse output example when external rising edge is selected
Selected
clock source fi
TAiIN
(rising edge is
selected)
TAiOUT
In this case, the contents of the reload register is 000416.
Fig. 25 Example when trigger is re-issued during pulse output
23