M37733MHBXXXFP Datasheet, PDF (66/89 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

PRELIMINARY _{NSootimcee: pTahriasmisentroict} ^{alimfinitsalasrpeescuifbicjeactitotno. change.}
MITSUBISHI MICROCOMPUTERS
M37733MHBXXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
ABSOLUTE MAXIMUM RATINGS
Symbol
Vcc
AVcc
VI
VI
VO
Pd
Topr
Tstg
Parameter
Conditions
Power source voltage
Analog power source voltage
Input voltage RESET, CNVss, BYTE
Input voltage P00 – P07, P10 – P17, P20 – P27,
P30 – P33, P40 – P47, P50 – P57,
P60 – P67, P70 – P77, P80 – P87,
VREF, XIN
Output voltage P00 – P07, P10 – P17, P20 – P27,
P30 – P33, P40 – P47, P50 – P57,
P60 – P67, P70 – P77, P80 – P87,
XOUT, E
Power dissipation
Ta = 25 °C
Operating temperature
Storage temperature
Ratings
Unit
–0.3 to +7
V
–0.3 to +7
V
–0.3 to +12
V
–0.3 to Vcc + 0.3
V
–0.3 to Vcc + 0.3
V
300
mW
–20 to +85
°C
–40 to +150
°C
RECOMMENDED OPERATING CONDITIONS (Vcc = 5 V ± 10%, Ta = –20 to +85 °C, unless otherwise noted)
Symbol
Parameter
Min.
Vcc
Power source voltage
f(XIN) : Operating
4.5
f(XIN) : Stopped, f(XCIN) = 32.768 kHz
2.7
AVcc
Analog power source voltage
Vss
Power source voltage
AVss
Analog power source voltage
High-level input voltage P00 – P07, P30 – P33, P40 – P47, P50 – P57, P60 – P67,
VIH
P70 – P77, P80 – P87, XIN, RESET, CNVss, BYTE, XCIN (Note 3) ^{0.8 Vcc}
VIH
High-level input voltage P10 – P17, P20 – P27 (in single-chip mode)
0.8 Vcc
VIH
High-level input voltage P10 – P17, P20 – P27
(in memory expansion mode and microprocessor mode)
0.5 Vcc
Low-level input voltage P00 – P07, P30 – P33, P40 – P47, P50 – P57, P60 – P67,
VIL
P70 – P77, P80 – P87, XIN, RESET, CNVss, BYTE, XCIN (Note 3)
0
VIL
Low-level input voltage P10 – P17, P20 – P27 (in single-chip mode)
0
Low-level input voltage P10 – P17, P20 – P27
VIL
(in memory expansion mode and microprocessor mode)
0
IOH(peak)
High-level peak output current P00 – P07, P10 – P17, P20 – P27, P30 – P33,
P40 – P47, P50 – P57, P60 – P67, P70 – P77,
P80 – P87
High-level average output current P00 – P07, P10 – P17, P20 – P27, P30 – P33,
IOH(avg)
P40 – P47, P50 – P57, P60 – P67, P70 – P77,
P80 – P87
Low-level peak output current P00 – P07, P10 – P17, P20 – P27, P30 – P33,
IOL(peak)
P40 – P43, P54 – P57, P60 – P67, P70 – P77,
P80 – P87
IOL(peak)
IOL(avg)
Low-level peak output current P44 – P47, P50 – P53
Low-level average output current P00 – P07, P10 – P17, P20 – P27, P30 – P33,
P40 – P43, P54 – P57, P60 – P67, P70 – P77,
P80 – P87
IOL(peak)
Low-level average output current P44 – P47, P50 – P53
f(XIN)
Main-clock oscillation frequency (Note 4)
f(XCIN)
Sub-clock oscillation frequency
Notes 1. Average output current is the average value of a 100 ms interval.
2. The sum of IOL(peak) for ports P0, P1, P2, P3, and P8 must be 80 mA or less,
the sum of IOH(peak) for ports P0, P1, P2, P3, and P8 must be 80 mA or less,
the sum of IOL(peak) for ports P4, P5, P6, and P7 must be 100 mA or less, and
the sum of IOH(peak) for ports P4, P5, P6, and P7 must be 80 mA or less.
3. Limits VIH and VIL for XCIN are applied when the sub clock external input selection bit = “1”.
4. The maximum value of f(XIN) = 12.5 MHz when the main clock division selection bit = “1”.
Limits
Typ.
5.0
Vcc
0
0
Max.
5.5
5.5
Vcc
Vcc
Vcc
0.2Vcc
0.2Vcc
0.16Vcc
–10
–5
10
20
5
15
25
32.768
50
Unit
V
V
V
V
V
V
V
V
V
V
mA
mA
mA
mA
mA
mA
MHz
kHz
66