PIC16F753 Datasheet, PDF (9/238 Pages) Microchip Technology – 14/16-Pin, Flash-Based 8-Bit CMOS Microcontrollers

PIC16F753/HV753
TABLE 1-1: PIC16F753/HV753 PINOUT DESCRIPTION (CONTINUED)
Name
Function
Input Output
Type Type
Description
VDD
VDD
Power — Positive supply.
VSS
VSS
Power — Ground reference.
RC0/OPA1IN+/AN4/C2IN0+
RC0
TTL CMOS General purpose I/O.
OPA1IN+ AN
— Op amp positive input.
AN4
AN
— A/D Channel 4 input.
C2IN0+
AN
— Comparator C2 positive input.
RC1/OPA1IN-/AN5/C1IN1-/
C2IN1-
RC1
OPA1IN-
TTL CMOS General purpose I/O.
AN
— Op amp negative input.
AN5
AN
— A/D Channel 5 input.
C1IN1-
AN
— Comparator C1 negative input.
C2IN1-
AN
— Comparator C2 negative input.
RC2/SLPCIN/AN6/
OPA1OUT/C1IN2-/C2IN2-
RC2
SLPCIN
TTL CMOS General purpose I/O.
AN
— Slope Compensator input.
AN6
AN
— A/D Channel 6 input.
OPA1OUT AN
HP Op amp output.
C1IN2-
AN
— Comparator C1 negative input.
C2IN2-
AN
— Comparator C2 negative input.
RC3/AN7/C1IN3-/C2IN3-
RC3
TTL CMOS General purpose I/O.
AN7
AN
— A/D Channel 7 input.
C1IN3-
AN
— Comparator C1 negative input.
C2IN3-
AN
— Comparator C2 negative input.
RC4/COG1OUT1/C2OUT
RC4
TTL CMOS General purpose I/O.
COG1OUT1 — CMOS COG output Channel 1.
C2OUT
—
HP Comparator C2 output.
RC5/COG1OUT0/CCP1
RC5
TTL CMOS General purpose I/O.
COG1OUT0 — CMOS COG output Channel 0.
CCP1
—
HP Capture/Compare/PWM 1.
Legend: AN = Analog input or output CMOS = CMOS compatible input or output
TTL = TTL compatible input
ST = Schmitt Trigger input with CMOS levels
HP = High Power
HV = High Voltage
* Alternate pin function.
Note 1: Input only.
2: Default pin function via the APFCON register.
3: Alternate pin function via the APFCON register.
4: RA3 pull-up is enabled when pin is configured as MCLR in Configuration Word.
 2013 Microchip Technology Inc.
Preliminary
DS40001709A-page 9