PIC16F753 Datasheet, PDF (100/238 Pages) Microchip Technology – 14/16-Pin, Flash-Based 8-Bit CMOS Microcontrollers

PIC16F753/HV753
11.13 Register Definitions: COG Control
REGISTER 11-1: COGxCON0: COG CONTROL REGISTER 0
R/W-0/0
GxEN
bit 7
R/W-0/0
GxOE1
R/W-0/0
GxOE0
R/W-0/0
GxPOL1
R/W-0/0
GxPOL0
R/W-0/0
GxLD
U-0
R/W-0/0
—
GxMD
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
q = Value depends on condition
bit 7
GxEN: COGx Enable bit
1 = Module is enabled
0 = Module is disabled
bit 6
GxOE1: COGxOUT1 Output Enable bit
1 = COGxOUT1 is available on associated I/O pin
0 = COGxOUT1 is not available on associated I/O pin
bit 5
GxOE0: COGxOUT0 Output Enable bit
1 = COGxOUT0 is available on associated I/O pin
0 = COGxOUT0 is not available on associated I/O pin
bit 4
GxPOL1: COGxOUT1 Output Polarity bit
1 = Output is inverted polarity
0 = Output is normal polarity
bit 3
GxPOL0: COGxOUT0 Output Polarity bit
1 = Output is inverted polarity
0 = Output is normal polarity
bit 2
GxLD: COGx Load Buffers bit
1 = Phase, blanking, and dead-band buffers to be loaded with register values on next input events
0 = Register to buffer transfer is complete
bit 1
Unimplemented: Read as ‘0’
bit 0
GxMD: COGx Mode bit
1 = COG outputs operate in Push-Pull mode
0 = COG outputs operate in Synchronous mode
DS40001709A-page 100
Preliminary
 2013 Microchip Technology Inc.