PIC16F753 Datasheet, PDF (191/238 Pages) Microchip Technology – 14/16-Pin, Flash-Based 8-Bit CMOS Microcontrollers

PIC16F753/HV753
22.3 DC Characteristics: PIC16HV753-I (Industrial)
PIC16HV753-E (Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param.
No.
Device Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
D010
Supply Current (IDD)^(1,2,3) —
PIC16HV753 —
20 TBD _A
40 TBD A
2.0 FOSC = 31 kHz
3.0 ^LFINTOSC
—
65 TBD A
4.5
D011*
— 215 TBD A
— 375 TBD A
2.0 FOSC = 1 MHz
3.0 ^{HFINTOSC Oscillator}
— 570 TBD A
4.5
D012*
— 335 TBD A
— 535 TBD A
2.0 FOSC = 4 MHz
3.0 ^HFINTOSC
— 795 TBD A
4.5
D013
— 0.530 TBD mA
— 0.830 TBD mA
2.0 FOSC = 8 MHz
3.0 ^HFINTOSC
— 1.35 TBD mA
4.5
D014
—
3.8 TBD mA
4.5 FOSC = 20 MHz
EC Oscillator
D015
— 130 —
A
2.0 FOSC = 1 MHz
— 245 —
A
3.0 ^{EC Oscillator}
— 360 —
A
5.0
D016
— 250 —
A
2.0 FOSC = 4 MHz
— 440 —
A
3.0 ^{EC Oscillator}
— 660 —
A
5.0
Legend:
*
†
Note 1:
2:
TBD = To Be Determined
These parameters are characterized but not tested.
Data in “Typ” column is at 4.5V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
The test conditions for all IDD measurements in active operation mode are: CLKIN = external square wave,
from rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption.
3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can
be extended by the formula IR = VDD/2REXT (mA) with REXT in k
 2013 Microchip Technology Inc.
Preliminary
D40001709A-page 191