PIC16F753 Datasheet, PDF (189/238 Pages) Microchip Technology – 14/16-Pin, Flash-Based 8-Bit CMOS Microcontrollers

PIC16F753/HV753
22.1 DC Characteristics: PIC16F753/HV753-I (Industrial)
PIC16F753/HV753-E (Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param.
No.
Sym.
Characteristic
Min. Typ† Max. Units
Conditions
Supply Voltage
D001 VDD
D001
PIC16F753
PIC16HV753
2.0 — 5.5 V FOSC < = 4 MHz
2.0 — 5.0⁽²⁾ V FOSC < = 4 MHz
D001B VDD
D001B
PIC16F753
PIC16HV753
2.0 — 5.5 V FOSC < = 8 MHz
2.0 — 5.0⁽²⁾ V FOSC < = 8 MHz
D001C VDD
D001C
PIC16F753
PIC16HV753
3.0 — 5.5 V FOSC < = 10 MHz
3.0 — 5.0⁽²⁾ V FOSC < = 10 MHz
D001D VDD
D001D
PIC16F753
PIC16HV753
4.5 — 5.5 V FOSC < = 20 MHz
4.5 — 5.0⁽²⁾ V FOSC < = 20 MHz
D002* VDR
RAM Data Retention
Voltage⁽¹⁾
1.5 — — V Device in Sleep mode
D003 VPOR VDD Start Voltage to
— VSS —
ensure internal Power-on
Reset signal
V See Table 19-1 for details
D004* SVDD
VDD Rise Rate to ensure 0.05 —
internal Power-on Reset
signal
— V/ms See Table 19-1 for details
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data.
2: On the PIC16HV753, VDD is regulated by a Shunt Regulator and is dependent on series resistor
(connected between the unregulated supply voltage and the VDD pin) to limit the current to 50 mA. See
Section 20.0 “Shunt Regulator (PIC16HV753 Only)” for design requirements.
 2013 Microchip Technology Inc.
Preliminary
D40001709A-page 189