PIC16F753 Datasheet, PDF (106/238 Pages) Microchip Technology – 14/16-Pin, Flash-Based 8-Bit CMOS Microcontrollers

PIC16F753/HV753
REGISTER 11-7: COGxASD0: COG AUTO-SHUTDOWN CONTROL REGISTER 0
R/W-0/0
R/W-0/0
R/W-0/0
R/W-0/0
R/W-0/0
R/W-0/0
U-0
GxASDE GxARSEN
GxASD1L<1:0>
GxASD0L<1:0>
—
bit 7
U-0
—
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
q = Value depends on condition
bit 7
bit 6
bit 5-4
bit 3-2
bit 1-0
GxASDE: Auto-Shutdown Event Status bit
1 = COG is in the shutdown state
0 = COG is either not in the shutdown state or will exit the shutdown state on the next rising event
GxARSEN: Auto-Restart Enable bit
1 = Auto-restart is enabled
0 = Auto-restart is disabled
GxASD1L<1:0>: COGxOUT1 Auto-Shutdown Override Level Select bits
11 = COGxOUT1 is tri-stated when shutdown is active
10 = The inactive state of the pin, including polarity, is placed on COGxOUT1 when shutdown is active
01 = A logic ‘1’ is placed on COGxOUT1 when shutdown is active
00 = A logic ‘0’ is placed on COGxOUT1 when shutdown is active
GxASD0L<1:0>: COGxOUT0 Auto-Shutdown Override Level Select bits
11 = COGxOUT0 is tri-stated when shutdown is active
10 = The inactive state of the pin, including polarity, is placed on COGxOUT0 when shutdown is active
01 = A logic ‘1’ is placed on COGxOUT0when shutdown is active
00 = A logic ‘0’ is placed on COGxOUT0when shutdown is active
Unimplemented: Read as ‘0’
DS40001709A-page 106
Preliminary
 2013 Microchip Technology Inc.