I960 Datasheet, PDF (42/70 Pages) Intel Corporation – i960 RP/RD I/O PROCESSOR AT 3.3 VOLTS

i960^® Rx I/O Processor at 3.3 V
Table 19. I_CC Characteristics
Symbol
Parameter
I_LI1
Input Leakage Current for each signal except
PCI Bus Signals, LOCK#/ONCE#,
WIDTH/HLTD0, WIDTH/HLTD1/RETRY,
BLAST#, D/C#/RST_MODE#, DEN#,TMS,
TRST#, TDI
I_LI2
Input Leakage Current for LOCK#/ONCE#,
WIDTH/HLTD0, WIDTH/HLTD1/RETRY,
BLAST#, D/C#/RST_MODE#, DEN#, TMS,
TRST#, TDI
I_LI3
Input Leakage Current for PCI Bus Signals
I_LO
Output Leakage Current
I_CC Active
Power Supply Current
(Power Supply) 80960RP 33/3.3
80960RD 66/3.3
Typ
-140
Max Units
Notes
± 80 µA 0 ≤ V_IN ≤ V_CC
-250 µA V_IN = 0.45 V (1)
±5
±5
1.00
1.30
µA 0 ≤ V_IN ≤ V_CC
µA 0.4 ≤ V_OUT ≤ V_CC
A (1,2)
I_CC Active
(Thermal)
Thermal Current
80960RP 33/3.3
80960RD 66/3.3
I_CC Active
(Power Modes)
Reset Mode
80960RP 33/3.3
80960RD 66/3.3
ONCE Mode
80960RP 33/3.3
80960RD 66/3.3
0.75
0.95
0.65
0.80
0.02
0.02
A (1,3)
A (4)
(4)
NOTES:
1. Measured with device operating and outputs loaded to the test condition in Figure 8.
2. I_CC Active (Power Supply) value is provided for selecting your system’s power supply. It is measured using one of the
worst case instruction mixes with V_CC = 3.6 V and ambient temperature = 55 ° C. This parameter is characterized but not
tested.
3. I_CC Active (Thermal) value is provided for your system’s thermal management. Typical I_CC is measured with V_CC = 3.3 V
and ambient temperature = 55 ° C. This parameter is characterized but not tested.
4. I_CC Active (Power modes) refers to the I_CC values that are tested when the device is in Reset mode or ONCE mode with
V_CC = 3.6 V and ambient temperature = 55 ° C.
36
ADVANCE INFORMATION