I960 Datasheet, PDF (41/70 Pages) Intel Corporation – i960 RP/RD I/O PROCESSOR AT 3.3 VOLTS

i960^® Rx I/O Processor at 3.3 V
4.3 Targeted DC Specifications
Table 18. DC Characteristics
Symbol
Parameter
V_IL
Input Low Voltage
V_IH1
Input High Voltage for all signals
except SCLK
V_IH2
V_OL1
V_OH1
Input High Voltage for SCLK
Output Low Voltage Processor signals
Output High Voltage Processor signals
V_OL2
V_OH2
V_OL3
V_OH3
V_OL4
Output Low Voltage PCI signals
Output High Voltage PCI signals
Output Low Voltage Memory Controller
Normal drive
Output High Voltage Memory
Controller Normal drive
Output Low Voltage Memory Controller
High Drive
Min
-0.5
2.0
2.1
2.4
V_CC - 0.5
2.4
2.4
Max Units
0.8
V (1)
V_CC + 0.5 V (1)
Notes
V_CC + 0.5 V (1)
0.45
V I_OL = 6 mA (3)
V I_OH = -2 mA (3)
I_OH = -200 µA (3)
0.55
V I_OL = 6 mA (1)
V I_OH = -2 mA (1)
0.45
V I_OL = 6 mA (4)
V I_OH = -2 mA (4)
0.45
V I_OL = 7 mA
V_OH4 Output High Voltage Memory
2.4
Controller High Drive
V I_OH = -2 mA
V_OL5
Output Low Voltage APIC Data Lines
0.45
V I_OL = 10 mA
C_IN
Input Capacitance - HL-PBGA
10
pF F_{S_CLK} = T_F Min (1, 2)
C_OUT I/O or Output Capacitance - HL-PBGA
10
pF F_{S_CLK} = T_F Min (1, 2)
C_CLK S_CLK Capacitance - HL-PBGA
5
12
pF F_{S_CLK} = T_F Min (1, 2)
C_IDSEL IDSEL Ball Capacitance
8
pF (1)
L_PIN
Ball Inductance
20
nH (1)
NOTES:
1. As required by the PCI Local Bus Specification Revision 2.1.
2. Not tested.
3. Processor signals include AD31:0, ALE, ADS#, BE3:0#, WIDTH/HLTD0, WIDTH/HLTD1/RETRY, D/C#/RST_MODE#,
W/R#, DT/R#, DEN#, BLAST#, LRDYRCV#, LOCK#/ONCE#, HOLD, FAIL#, TDO, DACK#, WAIT#, SDA, SCL.
4. Memory Controller signals include MA11:0, DP3:0, RAS3:0#, CAS7:0#, MWE3:0#, DWE1:0#, DALE1:0, CE1:0#,
LEAF1:0#.
5. Memory Controller signals capable of high drive are MA11:0, CAS7:0#, RAS3:0#, DWE1:0#.
ADVANCE INFORMATION
35