TLE94106EL Datasheet, PDF (17/75 Pages) Infineon Technologies AG – Six half bridge power outputs

TLE94106EL
General Product Characteristics
Table 5
Electrical Characteristics, V_S =5.5 V to 18 V, V_DD = 3.0V to 5.5V, T_j = -40°C to +150°C, EN= HIGH,
I_OUTn= 0 A; Typical values refer to V_DD = 5.0 V, V_S = 13.5 V and T_J = 25 °C unless otherwise
specified; all voltages with respect to ground, positive current flowing into pin (unless
otherwise specified) (cont’d)
Parameter
Symbol
Values
Unit Note or
Min. Typ. Max.
Test Condition
Number
SDO Valid Time for V_DD = 5V
t_VASDO5
–
50 65
ns
V_SDO < 0.2 x V_DD
P_4.4.79
V_SDO > 0.8 V_DD
C_load = 40pF ³⁾
Thermal warning & Shutdown
Thermal warning junction
T_jW
temperature
120 140 170 °C See Figure 11³⁾ P_4.4.80
Thermal shutdown junction T_jSD
temperature
150 175 200 °C See Figure 11³⁾ P_4.4.81
Thermal comparator hysteresis T_jHYS
–
5–
°C
3)
P_4.4.82
Ratio of SD to W temperature T_jSD / T_jW 1.05 1.20 –
–
3)
P_4.4.83
1) I_{S_HSON} does not include the load current
2) HS1, respectively HS2, is set to LED mode by setting OL_SEL_HS1 bit to 1, respectively OL_SEL_HS2 bit to 1
3) Not subject to production test, specified by design
4) Measured for 20% - 80% of V_S.
5) Not applicable in daisy chain configuration
Data Sheet
17
1.0
2016-09-08