IC-MN_16 Datasheet, PDF (61/62 Pages) IC-Haus GmbH – 25-BIT NONIUS ENCODER WITH 3-CH. SAMPLING 13-BIT Sin/D INTERPOLATION

iC-MN 25-BIT NONIUS ENCODER
WITH 3-CH. SAMPLING 13-BIT Sin/D INTERPOLATION
Rev F2, Page 61/62
Rel. Rel. Date^∗ Chapter
F2 2016-09-09 PACKAGING INFORMATION
ELECTRICAL
CHARACTERISTICS
REGISTER MAP (EEPROM)
OPERATING MODES and
CALIBRATION PROCEDURES
I/O INTERFACE with EXTENDED
FUNCTIONS
COMMAND and STATUS
REGISTERS
MT INTERFACE
STARTUP BEHAVIOR
DESIGN REVIEW: Notes On Chip
Functions
Modification
Added hint: Connecting pin VACO to VDD is mandatory
Item 711 rout, changed typ. value 5k → 4kOhm, added min. and max. values
Item A01, fosc: changed max. value 10.4 → 9.92 MHz
Item D08, fclk(SCL): changed max. value 81.25 kHz → 77.5kHz
Group Exx pin SLO/NSLO: description DSC coding corrected
Address 0x7A: Added chip revision Y5
Table 9: changed rout from 5k to 4k Ohm, according to elec. char. 711
Renamed life counter into sign-of-life counter
Sign-of-life counter range of values corrected
Description of command SOFT_RES enhanced
Corrected Figure 20
Enhanced with wew subchapter: Behaviour on Error
BiSS sequence on error corrected
Tab. MN Y2: Added item 5.
Tab. MN Y5: Added item 3.
Page
5
11
20
21
40
42
47
53
59
iC-Haus expressly reserves the right to change its products and/or specifications. An info letter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.com/infoletter; this letter is generated automatically and shall be sent to registered users by
email.
Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.
iC-Haus does not warrant the accuracy, completeness or timeliness of the specification and does not assume liability for any errors or omissions in these
materials.
The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of merchantability, fitness
for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which information refers and no
guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications of
the product.
iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably be expected
to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applications include, without
limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications or environments or in
automotive applications unless specifically designated for such use by iC-Haus.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
∗ _{Release Date format: YYYY-MM-DD}