EPM240_10 Datasheet, PDF (21/88 Pages) Altera Corporation – MAX II Device Family Data

Chapter 2: MAX II Architecture
2–13
MultiTrack Interconnect
The R4 interconnects span four LABs and are used for fast row connections in a four-
LAB region. Every LAB has its own set of R4 interconnects to drive either left or right.
Figure 2–10 shows R4 interconnect connections from an LAB. R4 interconnects can
drive and be driven by row IOEs. For LAB interfacing, a primary LAB or horizontal
LAB neighbor can drive a given R4 interconnect. For R4 interconnects that drive to the
right, the primary LAB and right neighbor can drive on to the interconnect. For R4
interconnects that drive to the left, the primary LAB and its left neighbor can drive on
to the interconnect. R4 interconnects can drive other R4 interconnects to extend the
range of LABs they can drive. R4 interconnects can also drive C4 interconnects for
connections from one row to another.
Figure 2–10. R4 Interconnect Connections
Adjacent LAB can
drive onto another
LAB’s R4 Interconnect
R4 Interconnect
Driving Left
R4 Interconnect
C4 Column Interconnects (1) Driving Right
LAB
Neighbor
Notes to Figure 2–10:
(1) C4 interconnects can drive R4 interconnects.
(2) This pattern is repeated for every LAB in the LAB row.
Primary
LAB (2)
LAB
Neighbor
The column interconnect operates similarly to the row interconnect. Each column of
LABs is served by a dedicated column interconnect, which vertically routes signals to
and from LABs and row and column IOEs. These column resources include:
■ LUT chain interconnects within an LAB
■ Register chain interconnects within an LAB
■ C4 interconnects traversing a distance of four LABs in an up and down direction
MAX II devices include an enhanced interconnect structure within LABs for routing
LE output to LE input connections faster using LUT chain connections and register
chain connections. The LUT chain connection allows the combinational output of an
LE to directly drive the fast input of the LE right below it, bypassing the local
interconnect. These resources can be used as a high-speed connection for wide fan-in
© October 2008 Altera Corporation
MAX II Device Handbook