|
AK4648 Datasheet, PDF (62/119 Pages) Asahi Kasei Microsystems – Stereo CODEC with MIC/HP/SPK-AMP | |||
|
◁ |
[AK4648]
SPKG2-0
bits
LIN2/RIN2/LIN3/RIN3/LIN4/RIN4 Ã SPLP/SPLN or SPRP/SPRN
ALC bit = â0â
ALC bit = â1â
SPKMN bit = â1â SPKMN bit = â0â SPKMN bit = â1â SPKMN bit = â0â
000
â1.59dB
+4.41dB
+0.41dB
+6.41dB
(default)
001
+0.41dB
+6.41dB
+2.41dB
+8.41dB
010
+4.63dB
+10.63dB
+6.63dB
+12.63dB
011
+6.63dB
+12.63dB
+8.63dB
+14.63dB
100
-6dB
0dB
-4dB
+2dB
101
-12dB
-6dB
-10dB
-4dB
110
N/A
N/A
N/A
N/A
111
N/A
N/A
N/A
N/A
Table 45. LIN2/RIN2/LIN3/RIN3/LIN4/RIN4 Input à Speaker-Amp Output Gain (typ.), N/A: Not available
â Analog Mixing: Full-differential Mono Input (L4DIF bit = â1â: IN4+/IN4â pins)
When L4DIF bit = â1â, LIN4 and RIN4 pins become IN4+ and IN4â pins, respectively.
When PMAINL4 bit = â1â, IN4+ and IN4â pins can be used as full-differential mono line input for analog mixing. When
the LINS4 and RINS4 bits are set to â1â, the input signal from the IN4+/IN4â pins is output to Speaker-Amp. When the
LINH4 and RINH4 bits are set to â1â, the input signal from the IN4+/IN4â pins is output to Headphone-Amp. When the
LINL4/RINR4 bits are set to â1â, the input signal from the IN4+/IN4â pins is output to the stereo line output amplifier.
Table 46, Table 47, Table 48, and Table 49 show the typical gain. Input signal amplitude is defined as (IN4+) â (IN4â).
AK4648
LIN4/IN4+ pin
MIC-Amp Lch
L4DIF bit PMAINL4 bit
RIN4/IN4â pin
MIC-Amp Rch
PMAINR4 bit
Lineout, HP-Amp, Speaker-Amp
Figure 42. Full-differential Mono Analog Mixing Circuit
LOVL bit
IN4+/IN4â Ã LOUT/ROUT
0
â6dB
(default)
1
â4dB
Table 46. IN4+/IN4â Input à LOUT/ROUT Output Gain (typ.)
LOVL bit
IN4+/IN4â Ã LOP/LON
0
0dB
(default)
1
+2dB
Table 47. IN4+/IN4â Input à LOP/LON Output Gain (typ.)
MS0625-E-01
- 62 -
2007/06
|
▷ |