DS90UB926Q-Q1 Datasheet, PDF (36/57 Pages) Texas Instruments – 5- to 85-MHz 24-Bit Color FPD-Link III Deserializer With Bidirectional Control Channel

DS90UB926Q-Q1
SNLS422B – JULY 2012 – REVISED JANUARY 2015
www.ti.com
Register Maps (continued)
ADD
(dec)
10
ADD Register
(hex) Name
0x0A SlaveID[2]
11 0x0B SlaveID[3]
12 0x0C SlaveID[4]
13 0x0D SlaveID[5]
14 0x0E SlaveID[6]
15 0x0F SlaveID[7]
16 0x10 SlaveAlias[0]
Table 11. Serial Control Bus Registers (continued)
Bit(s)
7:1
0
7:1
0
7:1
0
7:1
0
7:1
0
7:1
0
7:1
0
Register
Type
RW
RW
RW
RW
RW
RW
RW
Default Function
(hex)
0x00
Target
Slave
Device ID2
0x00
Target
Slave
Device ID3
0x00
Target
Slave
Device ID4
0x00
Target
Slave
Device ID5
0x00
Target
Slave
Device ID6
0x00
Target
Slave
Device ID7
0x00 ID[0] Match
Descriptions
7-bit Remote Slave Device ID 2
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID2, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
7-bit Remote Slave Device ID 3
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID3, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
7-bit Remote Slave Device ID 4
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID4, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
7-bit Remote Slave Device ID 5
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID5, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
7-bit Remote Slave Device ID 6
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID6, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
7-bit Remote Slave Device ID 7
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID7, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
7-bit Remote Slave Device Alias ID 0
Configures the decoder for detecting transactions
designated for an I2C Slave device attached to the remote
Serializer. The transaction will be remapped to the address
specified in the Slave ID0 register.
A value of 0 in this field disables access to the remote I2C
Slave.
Reserved
36
Submit Documentation Feedback
Copyright © 2012–2015, Texas Instruments Incorporated
Product Folder Links: DS90UB926Q-Q1