DS90UB914ATRHSTQ1 Datasheet, PDF (9/68 Pages) Texas Instruments – DS90UB913A-Q1/DS90UB914A-Q1 25 to100 MHz 10/12-Bit

DS90UB913A-Q1, DS90UB914A-Q1
www.ti.com
SNLS443A – MAY 2013 – REVISED JUNE 2013
ELECTRICAL CHARACTERISTICS ^{(1) (2) (3)}
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
LVCMOS DC SPECIFICATIONS 3.3V I/O (SER INPUTS, DES OUTPUTS, GPI, GPO, CONTROL INPUTS AND OUTPUTS)
V_IH
High Level Input
V_IN = 3.0V to 3.6V
Voltage
2.0
V_IN
V_IL
Low Level Input
V_IN = 3.0V to 3.6V
Voltage
GND
0.8
I_IN
Input Current
V_IN = 0V or 3.6V
V_IN = 3.0V to 3.6V
-20
±1
+20
V_OH
High Level Output
V_DDIO = 3.0V to 3.6V
Voltage
I_OH = −4 mA
2.4
V_DDIO
V_OL
Low Level Output
V_DDIO = 3.0V to 3.6V
Voltage
I_OL = +4 mA
GND
0.4
I_OS
Output Short Circuit
V_OUT = 0V
Serializer
Current
GPO Outputs
-15
Deserializer
LVCMOS Outputs
-35
I_OZ
TRI-STATE® Output
Current
PDB = 0V,
V_OUT = 0V or V_DD
LVCMOS Outputs -20
+20
LVCMOS DC SPECIFICATIONS 1.8V I/O (SER INPUTS, DES OUTPUTS, GPI, GPO, CONTROL INPUTS AND OUTPUTS)
V_IH
High Level Input
V_IN = 1.71V to 1.89V
Voltage
0.65 V_IN
V_IN
V_IL
Low Level Input
V_IN = 1.71V to 1.89V
Voltage
GND
0.35 V_IN
I_IN
Input Current
V_IN = 0V or 1.89V
V_IN = 1.71V to 1.89V
-20
±1
+20
V_OH
High Level Output
V_DDIO = 1.71V to 1.89V
Voltage
I_OH = −4 mA
V_DDIO -
0.45
V_DDIO
V_OL
Low Level Output
Voltage
V_DDIO = 1.71V to 1.89V Deserializer
I_OL = +4 mA
LVCMOS Outputs
GND
0.45
I_OS
Output Short Circuit
V_OUT = 0V
Serializer
Current
GPO Outputs
-11
Deserializer
LVCMOS Outputs
-17
I_OZ
TRI-STATE® Output
Current
PDB = 0V,
V_OUT = 0V or V_DD
LVCMOS Outputs
-20
+20
LVCMOS DC SPECIFICATIONS 2.8V I/O (SER INPUTS, GPI, GPO, CONTROL INPUTS AND OUTPUTS)
V_IH
High Level Input
V_IN = 2.52V to 3.08V
Voltage
0.7 V_IN
V_IN
V_IL
Low Level Input
V_IN = 2.52V to 3.08V
Voltage
GND
0.3 V_IN
I_IN
Input Current
V_IN = 0V or 3.08V
V_IN = 2.52V to 3.08V
-20
±1
+20
V_OH
High Level Output
V_DDIO = 2.52V to 3.08V
Voltage
I_OH = −4 mA
V_DDIO - 0.4
V_DDIO
V_OL
Low Level Output
Voltage
V_DDIO =2.52V to 3.08V Deserializer
I_OL = +4 mA
LVCMOS Outputs
GND
0.4
I_OS
Output Short Circuit
V_OUT = 0V
Serializer
Current
GPO Outputs
-11
Deserializer
LVCMOS Outputs
-20
Units
V
V
µA
V
V
mA
µA
V
µA
V
V
mA
µA
V
µA
V
V
mA
(1) The Electrical Characteristics tables list verified specifications under the listed Recommended Operating Conditions except as otherwise
modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not
verified.
(2) Current into device pins is defined as positive. Current out of a device pin is defined as negative. Voltages are referenced to ground
except VOD, ΔVOD, VTH and VTL which are differential voltages.
(3) Typical values represent most likely parametric norms at 1.8V or 3.3V, T_A = +25°C, and at the Recommended Operation Conditions at
the time of product characterization and are not verified.
Copyright © 2013, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Links: DS90UB913A-Q1 DS90UB914A-Q1