DS90UB913Q_13 Datasheet, PDF (7/63 Pages) TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS – DS90UB913Q/DS90UB914Q 10-100MHz 10/12- Bit DC-Balanced FPD-Link III Serializer and Deserializer with Bidirectional Control Channel

DS90UB913Q, DS90UB914Q
www.ti.com
Pin Name
VDDD
VDDSSCG
VDDR
VDDCML0/1
VDDPLL
VSS
SNLS420B – JULY 2012 – REVISED APRIL 2013
DS90UB914Q Deserializer Pin Descriptions (continued)
Pin No.
17
3
36
40,31
45
DAP
I/O, Type
Power, Digital
Power, Analog
Power, Analog
Power, Analog
Power, Analog
Ground, DAP
Description
Digital Core Power, 1.8V ±5%
SSCG PLL Power, 1.8V ±5%
Rx Analog Power, 1.8V ±5%
CML and Bidirectional control channel Drive Power, 1.8V±5%
PLL Power, 1.8V ±5%
DAP must be grounded. DAP is the large metal contact at the bottom side, located at
the center of the WQFN package. Connected to the ground plane (GND) with at least
16 vias.
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Supply Voltage – V_DDn (1.8V)
Supply Voltage – V_DDIO
LVCMOS Input Voltage I/O Voltage
CML Driver I/O Voltage (V_DD)
CML Receiver I/O Voltage (V_DD)
Junction Temperature
Storage Temperature
Maximum Package Power Dissipation Capacity Package
Package Derating:
DS90UB913Q 32 Lead WQFN
DS90UB914Q 48 Lead WQFN
ESD Rating (IEC 61000-4-2)
θ_JA(based on 16 thermal vias)
θ_JC(based on 16 thermal vias)
θ_JA(based on 16 thermal vias)
θ_JC(based on 16 thermal vias)
Air Discharge
(DOUT+, DOUT-, RIN+, RIN-)
Contact Discharge
(DOUT+, DOUT-, RIN+, RIN-)
ESD Rating (ISO10605)
ESD Rating (ISO10605)
Air Discharge
(DOUT+, DOUT-, RIN+, RIN-)
Contact Discharge
(DOUT+, DOUT-, RIN+, RIN-)
ESD Rating (HBM)
ESD Rating (CDM)
ESD Rating (MM)
−0.3V to +2.5V
−0.3V to +4.0V
−0.3V to + (VDDIO + 0.3V)
−0.3V to +(V_DD + 0.3V)
−0.3V to (V_DD + 0.3V)
+150°C
−65°C to +150°C
1/θ_JA °C/W above +25°
38.4 °C/W
6.9 °C/W
26.9 °C/W
4.4 °C/W
R_D = 330Ω, C_S = 150pF
≥±25 kV
≥±7 kV
R_D = 330Ω, C_S = 150/330pF
R_D = 2KΩ, C_S = 150/330pF
≥±15 kV
≥±8 kV
≥±8 kV
≥±1 kV
≥±250 V
For soldering specifications: see product folder at www.ti.com and www.ti.com/lit/an/snoa549c/snoa549c.pdf
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional; the device should not be operated beyond such conditions.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Copyright © 2012–2013, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: DS90UB913Q DS90UB914Q