DS90UB913Q_13 Datasheet, PDF (30/63 Pages) TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS – DS90UB913Q/DS90UB914Q 10-100MHz 10/12- Bit DC-Balanced FPD-Link III Serializer and Deserializer with Bidirectional Control Channel

DS90UB913Q, DS90UB914Q
SNLS420B – JULY 2012 – REVISED APRIL 2013
www.ti.com
Addr
(Hex)
0x08
0x09
0x0A
0x0B
0x0C
0x0D
Name
Slave ID[0]
Slave ID[1]
Slave ID[2]
Slave ID[3]
Slave ID[4]
Slave ID[5]
Table 2. DS90UB914Q Control Registers (continued)
Bits
Field
7:1 Slave ID0
0 RSVD
7:1 Slave ID1
0 RSVD
7:1 Slave ID2
0 RSVD
7:1 Slave ID3
0 RSVD
7:1 Slave ID4
0 RSVD
7:1 Slave ID5
0 RSVD
R/W
Default
Description
7-bit Remote Slave Device ID 0 Configures the
physical I²C address of the remote I²C Slave
device attached to the remote Serializer. If an
RW
0
I²C transaction is addressed to the Slave Alias
ID0, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved
7-bit Remote Slave Device ID 1 Configures the
physical I²C address of the remote I²C Slave
device attached to the remote Serializer. If an
RW
0
I²C transaction is addressed to the Slave Alias
ID1, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved
7-bit Remote Slave Device ID 2 Configures the
physical I²C address of the remote I²C Slave
device attached to the remote Serializer. If an
RW
0x00
I²C transaction is addressed to the Slave Alias
ID2, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved
7-bit Remote Slave Device ID 3 Configures the
physical I²C address of the remote I²C Slave
device attached to the remote Serializer. If an
RW
0
I²C transaction is addressed to the Slave Alias
ID3, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved
7-bit Remote Slave Device ID 4 Configures the
physical I²C address of the remote I²C Slave
device attached to the remote Serializer. If an
RW
0
I²C transaction is addressed to the Slave Alias
ID4, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved
7-bit Remote Slave Device ID 5 Configures the
physical I²C address of the remote I²C Slave
device attached to the remote Serializer. If an
RW
0x00
I²C transaction is addressed to the Slave Alias
ID5 , the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved
30
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated
Product Folder Links: DS90UB913Q DS90UB914Q