LSM6DS0 Datasheet, PDF (45/59 Pages) STMicroelectronics – Embedded temperature sensor

LSM6DS0
Register description
7.21
CTRL_REG4 (1Eh)
Control register 4.
Table 58. CTRL_REG4 register
0⁽¹⁾
0⁽¹⁾
Zen_G Yen_G Xen_G
0⁽¹⁾
LIR_XL1 4D_XL1
1. These bits must be set to ‘0’ for the correct operation of the device
Zen_G
Table 59. CTRL_REG4 register description
Gyroscope’s yaw axis (Z) output enable. Default value: 1
(0: Z-axis output disabled; 1: Z-axis output enabled)
Yen_G
Gyroscope’s roll axis (Y) output enable. Default value: 1
(0: Y-axis output disabled; 1: Y-axis output enabled)
Xen_G
Gyroscope’s pitch axis (X) output enable. Default value: 1
(0: X-axis output disabled; 1: X-axis output enabled)
LIR_XL1
Latched interrupt. Default value: 0
(0: interrupt request not latched; 1: interrupt request latched)
4D_XL1
4D option enabled on interrupt. Default value: 0
(0: interrupt generator uses 6D for position recognition; 1: interrupt generator uses
4D for position recognition)
7.22
CTRL_REG5_XL (1Fh)
Linear acceleration sensor Control Register 5.
Table 60. CTRL_REG5_XL register
DEC_1 DEC_0 Zen_XL Yen_XL Xen_XL
0⁽¹⁾
0⁽¹⁾
0⁽¹⁾
1. These bits must be set to ‘0’ for the correct operation of the device
DEC_ [0:1]
Table 61. CTRL_REG5_XL register description
Decimation of acceleration data on OUT REG and FIFO. Default value: 00
(00: no decimation;
01: update every 2 samples;
10: update every 4 samples;
11: update every 8 samples)
Zen_XL
Accelerometer’s Z-axis output enable. Default value: 1
(0: Z-axis output disabled; 1: Z-axis output enabled)
Yen_XL
Accelerometer’s Y-axis output enable. Default value: 1
(0: Y-axis output disabled; 1: Y-axis output enabled)
Xen_XL
Accelerometer’s X-axis output enable. Default value: 1
(0: X-axis output disabled; 1: X-axis output enabled)
DocID025604 Rev 3
45/59
59