LSM6DS0 Datasheet, PDF (24/59 Pages) STMicroelectronics – Embedded temperature sensor

Functionality
x_i,y_i,z_i
Figure 11. Continuous mode
x₀
y₀
z₀
x₁
y₁
z₁
x₂
y₂
z₂
x₃₀
y₃₀
z₃₀
x₃₁
y₃₁
z₃₁
LSM6DS0
3.5.4
Continuous-to-FIFO mode
In Continuous-to-FIFO mode (FIFO_CTRL (2Eh)(FMODE [2:0] = 011), FIFO behavior
changes according to the INT_GEN_SRC_XL (26h)(IA_XL) bit. When the
INT_GEN_SRC_XL (26h)(IA_XL) bit is equal to '1', FIFO operates in FIFO mode. When the
INT_GEN_SRC_XL (26h)(IA_XL) bit is equal to '0', FIFO operates in Continuous mode.
The interrupt generator should be set to the desired configuration by means of
INT_GEN_CFG_XL (06h), INT_GEN_THS_X_XL (07h), INT_GEN_THS_Y_XL (08h) and
INT_GEN_THS_Z_XL (09h).
The CTRL_REG4 (1Eh)(LIR_XL) bit should be set to '1' in order to have latched interrupt.
Figure 12. Continuous-to-FIFO mode
x_i,y_i,z_i
x₀
y₀
z₀
x₁
y₁
z₁
x₂
y₂
z₂
x₃₀
y₃₀
z₃₀
x₃₁
y₃₁
z₃₁
x_i,y_i,z_i
x₀
y₀
z₀
x₁
y₁
z₁
x₂
y₂
z₂
x₃₁
y₃₁
z₃₁
24/59
Continuous Mode
Trigger event
FIFO Mode
DocID025604 Rev 3