LSM6DS0 Datasheet, PDF (12/59 Pages) STMicroelectronics – Embedded temperature sensor

Module specifications
LSM6DS0
2.2
Electrical characteristics
@ Vdd = 2.2 V, T = 25 °C unless otherwise noted
Symbol
Parameter
Table 4. Electrical characteristics
Test conditions Min.
Typ.⁽¹⁾ Max.
Unit
Vdd Supply voltage
1.71
3.6
V
Vdd_IO Power supply for I/O
1.71
Vdd + 0.1 V
LA_Idd
Accelerometer current consumption in
normal mode
ODR = 10 Hz
ODR = 50 Hz
ODR  119 Hz
60
160
μA
330
G_Idd
Gyroscope current consumption in
normal mode
4.0
mA
Top
Trise
Twait
Operating temperature range
Time for power supply rising⁽²⁾
Time delay between Vdd_IO and Vdd ⁽²⁾
-40
+85
°C
0.01
100
ms
0
10
ms
1. Typical specifications are not guaranteed.
2. Please refer to Section 2.2.1: Recommended power-up sequence for more details.
2.2.1
Recommended power-up sequence
For the power-up sequence please refer to the following figure, where:
 Trise is the time for the power supply to rise from 10% to 90% of its final value
 Twait is the time delay between the end of the Vdd_IO ramp (90% of its final value)
and the start of the Vdd ramp
Figure 2. Recommended power-up sequence
Trise
Vdd_IO ^0V
Vdd ^0V
Twait
Trise
12/59
DocID025604 Rev 3