LSM6DS3 Datasheet, PDF (27/100 Pages) STMicroelectronics – always-on 3D accelerometer and 3D gyroscope

LSM6DS3
Module specifications
4.5
Note:
Absolute maximum ratings
Stresses above those listed as “Absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 8. Absolute maximum ratings
Symbol
Ratings
Maximum value
Unit
Vdd Supply voltage
-0.3 to 4.8
V
T_STG Storage temperature range
Sg Acceleration g for 0.2 ms
-40 to +125
°C
10,000
g
ESD Electrostatic discharge protection (HBM)
2
kV
Input voltage on any control pin
Vin
0.3 to Vdd_IO +0.3
V
(including CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0)
Supply voltage on any pin should never exceed 4.8 V.
This device is sensitive to mechanical shock, improper handling can cause
permanent damage to the part.
This device is sensitive to electrostatic discharge (ESD), improper handling can
cause permanent damage to the part.
DocID026899 Rev 8
27/100
100