S71GL032A Datasheet, PDF (64/102 Pages) SPANSION – Stacked Multi-Chip Product (MCP) Flash Memory and RAM

Advance Information
Absolute Maximum Ratings
Storage Temperature, Plastic Packages . . . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature with Power Applied . . . . . . . . . . . . . . –65°C to +125°C
Voltage with Respect to Ground:
V_CC (Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
ACC and RESET# (Note 2) . . . . . . . . . . . . . . . . . . . . –0.5 V to +12.5 V
All other pins (Note 1) . . . . . . . . . . . . . . . . . . . . . –0.5 V to V_CC+0.5 V
Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs
or I/Os may overshoot V_SS to –2.0 V for periods of up to 20 ns. See Figure 9.
Maximum DC voltage on input or I/Os is V_CC + 0.5 V. During voltage transitions,
input or I/O pins may overshoot to V_CC + 2.0 V for periods up to 20 ns. See Figure
10.
2. Minimum DC input voltage on pins A9, OE#, ACC, and RESET# is –0.5 V. During
voltage transitions, A9, OE#, ACC, and RESET# may overshoot V_SS to –2.0 V for
periods of up to 20 ns. See Figure 9. Maximum DC input voltage on pin A9, OE#,
ACC, and RESET# is +12.5 V which may overshoot to +14.0V for periods up to
20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short
circuit should not be greater than one second.
4. Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only; functional operation
of the device at these or any other conditions above those indicated in the
operational sections of this data sheet is not implied. Exposure of the device to
absolute maximum rating conditions for extended periods may affect device
reliability.
+0.8 V
–0.5 V
–2.0 V
20 ns
20 ns
20 ns
V_CC
+2.0 V
V_CC
+0.5 V
2.0 V
20 ns
20 ns
20 ns
Figure 9. Maximum Negative
Overshoot Waveform
Figure 10. Maximum Positive
Overshoot Waveform
Operating Ranges
Industrial (I) Devices
Ambient Temperature (T_A) . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Supply Voltages
V_CC for full voltage range . . . . . . . . . . . . . . . . . . . . . . . . . +2.7 V to +3.6 V
V_CC for regulated voltage range . . . . . . . . . . . . . . . . . . . . . +3.0 V to +3.6 V
V_IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V_CC
Note:Operating ranges define those limits between which the functionality of the device is guaranteed.
64
S71GL032A Based MCPs
S71GL032A_00_A0 March 31, 2005