S71GL032A Datasheet, PDF (2/102 Pages) SPANSION – Stacked Multi-Chip Product (MCP) Flash Memory and RAM

Notice On Data Sheet Designations
Spansion LLC issues data sheets with Advance Information or Preliminary designations to advise
readers of product information or intended specifications throughout the product life cycle, including
development, qualification, initial production, and full production. In all cases, however, readers are
encouraged to verify that they have the latest information before finalizing their design. The follow-
ing descriptions of Spansion data sheet designations are presented here to highlight their presence
and definitions.
Advance Information
The Advance Information designation indicates that Spansion LLC is developing one or more specific
products, but has not committed any design to production. Information presented in a document
with this designation is likely to change, and in some cases, development on the product may discon-
tinue. Spansion LLC therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion LLC. The
information is intended to help you evaluate this product. Do not design in this product without con-
tacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a com-
mitment to production has taken place. This designation covers several aspects of the product life cy-
cle, including product qualification, initial production, and the subsequent phases in the
manufacturing process that occur before full production is achieved. Changes to the technical specifi-
cations presented in a Preliminary document should be expected while keeping these aspects of pro-
duction under consideration. Spansion places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. The Preliminary status of this document indicates that product qualification has been completed,
and that initial production has begun. Due to the phases of the manufacturing process that require
maintaining efficiency and quality, this document may be revised by subsequent versions or modifica-
tions due to changes in technical specifications.”
Combination
Some data sheets will contain a combination of products with different designations (Advance Infor-
mation, Preliminary, or Full Production). This type of document will distinguish these products and
their designations wherever necessary, typically on the first page, the ordering information page, and
pages with DC Characteristics table and AC Erase and Program table (in the table notes). The dis-
claimer on the first page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal
changes are expected, the Preliminary designation is removed from the data sheet. Nominal changes
may include those affecting the number of ordering part numbers available, such as the addition or
deletion of a speed option, temperature range, package type, or V_IO range. Changes may also in-
clude those needed to clarify a description or to correct a typographical error or incorrect specifica-
tion. Spansion LLC applies the following conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. Spansion LLC deems the products to have been in sufficient production volume such that sub-
sequent versions of this document are not expected to change. However, typographical or specification
corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local AMD or
Fujitsu sales office.