LAN9313 Datasheet, PDF (391/398 Pages) SMSC Corporation – Three Port 10/100 Managed Ethernet Switch with MII

Three Port 10/100 Managed Ethernet Switch with MII
Datasheet
14.5.3 Power-On Configuration Strap Valid Timing
This diagram illustrates the configuration strap valid timing requirements in relation to power-on. In
order for valid configuration strap values to be read at power-on, the following timing requirements
must be met.
VDD33IO
Configuration Straps
2.0V
t_cfg
Figure 14.3 Power-On Configuration Strap Latching Timing
Table 14.7 Power-On Configuration Strap Latching Timing Values
SYMBOL
t_cfg
DESCRIPTION
Configuration strap valid time
MIN
TYP
MAX
15
UNITS
mS
Note: Configuration straps must only be pulled high or low. Configuration straps must not be driven
as inputs.
Note: Device configuration straps are also latched as a result of nRST assertion. Refer to Section
14.5.2, "Reset and Configuration Strap Timing," on page 390 and Section 4.2.4, "Configuration
Straps," on page 45 for additional details.
SMSC LAN9313/LAN9313i
391
DATASHEET
Revision 1.2 (04-08-08)