LAN9313 Datasheet, PDF (200/398 Pages) SMSC Corporation – Three Port 10/100 Managed Ethernet Switch with MII

Three Port 10/100 Managed Ethernet Switch with MII
Datasheet
BITS
DESCRIPTION
19:16
15:0
CSR Byte Enable (CSR_BE[3:0])
This field is a 4-bit byte enable used for selection of valid bytes during write
operations. Bytes which are not selected will not be written to the
corresponding Switch Engine CSR.
CSR_BE[3] corresponds to register data bits [31:24]
CSR_BE[2] corresponds to register data bits [23:16]
CSR_BE[1] corresponds to register data bits [15:8]
CSR_BE[0] corresponds to register data bits [7:0]
Typically all four byte enables should be set for auto increment and auto
decrement operations.
CSR Address (CSR_ADDR[15:0])
This field selects the 16-bit address of the Switch Fabric CSR that will be
accessed with a read or write operation. Refer to Table 13.12, “Indirectly
Accessible Switch Control and Status Registers,” on page 253 for a list of
Switch Fabric CSR addresses.
TYPE
R/W
R/W
DEFAULT
0h
00h
Revision 1.2 (04-08-08)
200
DATASHEET
SMSC LAN9313/LAN9313i