|
SI5347 Datasheet, PDF (21/59 Pages) Silicon Laboratories – DUAL/QUAD DSPLL ANY-FREQUENCY, ANY-OUTPUT JITTER ATTENUATORS | |||
|
◁ |
Si5347/46
Table 14. Absolute Maximum Ratings1,2,3
Parameter
Symbol
Test Condition
Value
Unit
DC Supply Voltage
Input Voltage Range
VDD
â0.5 to 3.8
V
VDDA
â0.5 to 3.8
V
VDDO
â0.5 to 3.8
V
VDDS
â0.5 to 3.8
V
VI1
IN0 â IN3/FB_IN
â0.85 to 3.8
V
VI2
RST, OE0, OE1, I2C_SEL,
â0.5 to 3.8
V
FINC, FDEC, PLL_SEL[1:0]
SDA/SDIO, A1/SDO, SCLK,
A0/CS
Latch-up Tolerance
VI3
XA/XB
LU
â0.5 to 2.7
V
JESD78 Compliant
ESD Tolerance
HBM
100 pF, 1.5 kï
2.0
kV
Junction Temperature
Storage Temperature Range
Soldering Temperature
(Pb-free profile)3
Soldering Temperature Time at TPEAK
(Pb-free profile)4
TJCT
TSTG
TPEAK
TP
â55 to 150
°C
â55 to +150
°C
260
°C
20â40
s
Note:
1. Permanent device damage may occur if the absolute maximum ratings are exceeded. Functional operation should be
restricted to the conditions as specified in the operational sections of this data sheet. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
2. 64-QFN and 44-QFN packages are RoHS-6 compliant.
3. For detailed MSL and packaging information, go to www.silabs.com/support/quality/pages/RoHSInformation.aspx.
4. The device is compliant with JEDEC J-STD-020.
Rev. 1.1
21
|
▷ |