English
Language : 

HD64F3694HV Datasheet, PDF (217/452 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Tiny Series
Section 13 Watchdog Timer
13.3 Operation
The watchdog timer is provided with an 8-bit counter. If 1 is written to WDON while writing 0 to
B2WI when the TCSRWE bit in TCSRWD is set to 1, TCWD begins counting up. (To operate
the watchdog timer, two write accesses to TCSRWD are required.) When a clock pulse is input
after the TCWD count value has reached H'FF, the watchdog timer overflows and an internal reset
signal is generated. The internal reset signal is output for a period of 256 φosc clock cycles. TCWD
is a writable counter, and when a value is set in TCWD, the count-up starts from that value. An
overflow period in the range of 1 to 256 input clock cycles can therefore be set, according to the
TCWD set value.
Figure 13.2 shows an example of watchdog timer operation.
Example: With 30ms overflow period when φ = 4 MHz
4 × 106 × 30 × 10–3 = 14.6
8192
Therefore, 256 – 15 = 241 (H'F1) is set in TCW.
H'FF
H'F1
TCWD
count value
TCWD overflow
H'00
Start
H'F1 written
to TCWD
Internal reset
signal
H'F1 written to TCWD
Reset generated
256 φosc clock cycles
Figure 13.2 Watchdog Timer Operation Example
Rev.5.00 Nov. 02, 2005 Page 187 of 418
REJ09B0028-0500