PIC24HJ12GP201_11 Datasheet, PDF (190/262 Pages) Microchip Technology – High-Performance, 16-bit Microcontrollers 5-cycle latency

PIC24HJ12GP201/202
TABLE 22-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
Standard Operating Conditions: 3.0V to 3.6V
DC CHARACTERISTICS
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Operating Current (IDD)⁽²⁾
DC20d
24
30
mA
-40°C
DC20a
DC20b
27
30
mA
27
30
mA
+25°C
+85°C
3.3V
10 MIPS⁽³⁾
DC20c
27
35
mA
+125°C
DC21d
30
40
mA
-40°C
DC21a
DC21b
DC21c
31
40
mA
32
45
mA
33
45
mA
+25°C
+85°C
+125°C
3.3V
16 MIPS⁽³⁾
DC22d
35
50
mA
-40°C
DC22a
DC22b
38
50
mA
38
55
mA
+25°C
+85°C
3.3V
20 MIPS⁽³⁾
DC22c
39
55
mA
+125°C
DC23d
47
70
mA
-40°C
DC23a
DC23b
48
70
mA
48
70
mA
+25°C
+85°C
3.3V
30 MIPS⁽³⁾
DC23c
DC24d
48
70
mA
56
90
mA
+125°C
-40°C
DC24a
DC24b
56
90
mA
54
90
mA
+25°C
+85°C
3.3V
40 MIPS
DC24c
54
90
mA
+125°C
Note 1:
2:
3:
Data in “Typical” column is at 3.3V, 25°C unless otherwise stated.
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all IDD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to VSS.
MCLR = VDD, WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are
operational. No peripheral modules are operating; however, every peripheral is being clocked (PMD bits
are all zeroed).
These parameters are characterized, but are not tested in manufacturing.
DS70282E-page 190
© 2007-2011 Microchip Technology Inc.