MB81N643289 Datasheet, PDF (64/64 Pages) Fujitsu Component Limited. – 8 x 256K x 32 BIT DOUBLE DATA RATE FCRAMTM

MB81N643289-50/-60 Preliminary (AE1E)
FUJITSU LIMITED
For further information please contact:
Japan
FUJITSU LIMITED
Corporate Global Business Support Division
Electronic Devices
4-1-1, Kamikodanaka
Nakahara-ku, Kawasaki-shi
Kanagawa 211-8588, Japan
Tel: [phone]
Fax: [phone]
North and South America
FUJITSU MICROELECTRONICS, INC.
Semiconductor Division
3545 North First Street
San Jose, CA 95134-1804, U.S.A.
Tel: [phone]
Fax: [phone]
Europe
FUJITSU MIKROELEKTRONIK GmbH
Am Siebenstein 6-10
63303 Dreieich-Buchschlag
Germany
Tel: [phone]
Fax: [phone]
Asia Pacific
FUJITSU MICROELECTRONICS ASIA PTE. LIMITED
#05-08, 151 Lorong Chuan
New Tech Park
Singapore 556741
Tel: [phone]
Fax: [phone]
F0003
© FUJITSU LIMITED Printed in Japan
64
All Rights Reserved.
The contents of this document are subject to change
without notice. Customers are advised to consult with
FUJITSU sales representatives before ordering.
The information and circuit diagrams in this document are
presented as examples of semiconductor device applica-
tions, and are not intended to be incorporated in devices
for actual use. Also, FUJITSU is unable to assume respon-
sibility for infringement of any patent rights or other rights
of third parties arising from the use of this information or
circuit diagrams.
FUJITSU semiconductor devices are intended for use in
standard applications (computers, office automation and
office equipment industrial, communications, and
measurement equipment, personal or household devices,
etc.).
IMPORTANT NOTE: Customers considering the use of
our products in special applications where failure or
abnormal operation may directly affect human lives or
cause physical injury or property damage, or where
extremely high lives of reliability are demanded (such as
aerospace systems, atomic energy controls, sea floor
repeaters, vehicle operating controls, medical devices for
life support, etc.) are requested to consult with FUJITSU
sales representatives before such use. The company will
not be responsible for damages arising from such use
without prior approval.
There is a slight risk of failure with all semiconductor
devices. You must protect against injury, damage to loss
from such failures by incorporating safety design
measures into your facility and equipment such as redun-
dancy, fire protection, and prevention of over-current
levels and other abnormal operating conditions.
If the products described in this document represent goods
or technologies subject to restrictions based on the
Foreign Exchange and Foreign Trade Control Low, you
must obtain permission to export these products.