MC908AB32CFUE Datasheet, PDF (350/392 Pages) Freescale Semiconductor, Inc – Microcontrollers

Keyboard Interrupt Module (KBI)
Address: $001B
Bit 7
6
5
4
3
2
1
Bit 0
Read: 0
0
0
0
KEYF
0
IMASKK MODEK
Write:
ACKK
Reset: 0
0
0
0
0
0
0
0
= Unimplemented
Figure 19-3. Keyboard Status and Control Register (KBSCR)
Bits 7–4 — Not used
These read-only bits always read as logic 0s.
KEYF — Keyboard Flag Bit
This read-only bit is set when a keyboard interrupt is pending. Reset
clears the KEYF bit.
1 = Keyboard interrupt pending
0 = No keyboard interrupt pending
ACKK — Keyboard Acknowledge Bit
Writing a logic 1 to this write-only bit clears the keyboard interrupt
request. ACKK always reads as logic 0. Reset clears ACKK.
IMASKK— Keyboard Interrupt Mask Bit
Writing a logic 1 to this read/write bit prevents the output of the
keyboard interrupt mask from generating interrupt requests. Reset
clears the IMASKK bit.
1 = Keyboard interrupt requests masked
0 = Keyboard interrupt requests not masked
MODEK — Keyboard Triggering Sensitivity Bit
This read/write bit controls the triggering sensitivity of the keyboard
interrupt pins. Reset clears MODEK.
1 = Keyboard interrupt requests on falling edges and low levels
0 = Keyboard interrupt requests on falling edges only
Technical Data
350
Keyboard Interrupt Module (KBI)
MC68HC908AB32 — Rev. 1.1
Freescale Semiconductor